Arno USA Hires Business Development Manager
Keith Stroup has more than 30 years of industry experience.
Arno USA, the North American headquarters and branch of Arno Werkzeuge, a Germany-based cuttong tool manufacturer, has hired Keith Stroup as Business Development Manager for the company. He will be responsible for managing all distribution channels and partners including representatives, agents, distributors and online catalog houses in North America.
Mr. Stroup comes to Arno Werkzeuge USA with over 30 years of experience in the metalworking, manufacturing and cutting tools industry. Most recently he served at Kennametal as a regional sales manager serving the Northeastern United States.
Related Content
-
How to Tackle Tough Angled Pocket Milling With Two Tools
Milling a deep pocket with a tight corner radius comes with unique challenges, but using both a flat bottom drill and a necked-down finishing tool can help.
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
All-Around Mill Improves Productivity and Cost for Valve Job
Adopting a mill with a double-negative rake and pockets compatible with multiple insert geometries enabled Progressive Metal Service to increase feed and lower scrap rates for a valve.