Multi-axis machining with Fusion
Published

Buying Preferences Of Moldmakers

CIMdata recently conducted an extensive worldwide study of moldmakers to better understand current moldmaking operational processes and technologies being employed, issues being faced by mold producers, their plans to remain competitive in a tough worldwide environment and the requirements that they place on their CAD/CAM suppliers. One of the many areas examined and presented in this 135-page report was that of CAD/CAM buying preferences.

Share

CIMdata recently conducted an extensive worldwide study of moldmakers to better understand current moldmaking operational processes and technologies being employed, issues being faced by mold producers, their plans to remain competitive in a tough worldwide environment and the requirements that they place on their CAD/CAM suppliers. One of the many areas examined and presented in this 135-page report was that of CAD/CAM buying preferences. Comparisons were drawn among North American, European and Japanese moldmakers, and it turned out that there are significant differences among moldmakers in each of these geographies.

Some of the preferences considered in the survey and discussed below are:

Openness to alternative suppliers—Approximately 70 percent of worldwide moldmakers are generally open to the use of alternate suppliers and CAD/CAM products. The remaining 30 percent were committed to their existing suppliers. Approximately 80 percent of Japanese mold producers were open to alternative vendors, but only 60 percent of European companies responded in this way. This may be good news for vendors entering the Japanese market, but it is less favorable to suppliers attempting to acquire new accounts in Europe. In North America, 70 percent of the firms took this position.

Moldmakers that are committed to a particular vendor or product were asked why they were not open to other options. Approximately half of this group indicated that they are fully satisfied with their current product and have no interest in exploring alternatives. Approximately one quarter have no control over the product selection, in that a corporate group decides on the product to be used. The remaining quarter indicated they are committed to using the same product as their primary customer in order to maintain compatibility.

Type of offering—Moldmakers were asked if they prefer a CAD/CAM product that is totally focused on mold producers, an integrated CAD/CAM solution or a generic "best-in-class" offering. More moldmakers worldwide (45 percent) prefer a product that is specifically directed at their needs as compared to a more generic offering. Approximately 35 percent of moldmakers opt for an integrated CAD/CAM offering, while 20 percent prefer a generic "best-in-class" type of product.

There are some major differences in preference among the geographical area. For example, more than half of the North American moldmakers would rather have a product focused on moldmakers, while more than half of the Japanese firms would select an integrated CAD/CAM solution. European companies are more closely divided with 40 percent opting for a product focused on mold producers and an integrated CAD/CAM offering, while 20 percent would select a generic product.

One or multiple vendors—Moldmakers worldwide endorse the desirability of a single vendor, as approximately 70 percent of companies favor this approach. North American mold producers are even stronger in this preference, as nearly 75 percent favor a single vendor. This position is shared by about 65 percent of European firms.

Sales representation—The results of this survey reveal that users generally prefer to deal with vendor salespeople, as half of the respondents selected this option. Approximately 30 percent favor interacting with a reseller and 20 percent favor a service provider or system integrator. This data should give vendors some pause in that the trend is toward less use of direct salespeople and greater use of resellers. While no company in the survey preferred either a storefront or use of a Web site, CIMdata believes that use of a Web site will become more accepted.

ProShop
HCL CAMWorks
Surface finishing in Fusion
Koma Precision
Gardner Business Intelligence
World Machine Tool Survey
SolidCAM
MMS Made in the USA
Techspex
MMS Top Shops
Hurco
Starrett 2900 Series Digital Indicator

Related Content

CAD/CAM

TTI Brings Specialty Gear Production In-House with Multiaxis Machining

By investing in a 3+2-axis machine and utilizing simulation software for diagnostic checks, Techtronic Industries turned a four- to ten-week lead time into a one- to two-week lead time.

Read More
CAD/CAM

When to Use Custom Macros With a CAM System

Custom macros can offer benefits even when using a CAM system to prepare programs – but must be implemented with the right considerations.

Read More

IMTS Takeaways From the Modern Machine Shop Editorial Team

The first in-person IMTS in four years left the MMS editorial staff with a lot to digest. Here are a few of our takeaways from the show floor.

Read More
CAD/CAM

Can ChatGPT Create Usable G-Code Programs?

Since its debut in late 2022, ChatGPT has been used in many situations, from writing stories to writing code, including G-code. But is it useful to shops? We asked a CAM expert for his thoughts.

Read More

Read Next

3 Mistakes That Cause CNC Programs to Fail

Despite enhancements to manufacturing technology, there are still issues today that can cause programs to fail. These failures can cause lost time, scrapped parts, damaged machines and even injured operators.

Read More
Vertical Machining Centers

5 Tips for Running a Profitable Aerospace Shop

Aerospace machining is a demanding and competitive sector of manufacturing, but this shop demonstrates five ways to find aerospace success.

Read More
Deburring in Fusion