End Mills Cut through Hard Materials
Amerimold 2017: YG-1 Tool’s 4G and X5070 end mills are designed to cut through hard materials.
YG-1 Tool’s 4G and X5070 end mills are designed to cut through hard materials; the 4G and 4G Rougher models can handle materials as hard as 55 HRC, while the X5070 is specifically designed to process materials ranging from 50 to 70 HRC. The tools feature tailored coatings that allow cutting through hardened steel, steel forgings, castings and a variety of other materials. The X5070 also features a blue coating that helps to identify wear.
Related Content
-
How to Mitigate Chatter to Boost Machining Rates
There are usually better solutions to chatter than just reducing the feed rate. Through vibration analysis, the chatter problem can be solved, enabling much higher metal removal rates, better quality and longer tool life.
-
Twin Spindle Design Doubles Production of Small Parts
After experiencing process stalls in the finishing stage of production, Bryan Machine Service designed an air-powered twin spindle and indexable rotating base to effectively double its production of small parts.
-
Widia Introduces Solid End Mill for Shoulder and Side Milling
The WCE solid end milling series features a five-flute geometry specifically designed for optimal performance when shoulder milling and side milling carbon, stainless steel and cast iron.
