Turning Center Enables Off-Center Machining
Okuma’s Genos L300-MY turning center features a Y axis for off-center milling, drilling and tapping capability.
Okuma’s Genos L300-MY turning center features a Y axis for off-center milling, drilling and tapping capability. The turning center accommodates workpieces ranging to 11.81" (300 mm) in diameter and 17.72" (450 mm) in length. Y-axis travel measures 3.94", while the Z-axis travel measures 17.7". Spindle speeds range from 25 to 3,000 rpm, or as fast as 4,500 rpm for milling. The tailstock quill diameter measures 3.54" (90 mm), and quill travel is 11 mm. The V12 M-turret accommodates 12 tools and offers a 0.2-sec. indexing time. The machine features a 10" three-jaw chuck, a contouring C axis and a manual touch presetter. The machine can be equipped with one radial and one axial live tool.
Related Content
-
How to Tackle Tough Angled Pocket Milling With Two Tools
Milling a deep pocket with a tight corner radius comes with unique challenges, but using both a flat bottom drill and a necked-down finishing tool can help.
-
Tungaloy Expands Drill System With Drill Sleeves
Adding drill sleeves to the standard lineup enhances drilling productivity of Swiss-type sliding-head automatic lathes.
-
Kay Engineering's Gundrilling Machine Performs Range of Operations
Kay Engineering’s DeHoff 20144 is used to perform gundrilling, pull boring, roller burnishing and thread tapping.
