| Home | Back to Equipment Review | Talk To Us | Previous Page (or Use Back Button) |
| Visit the Workholding & Work Handling Zone |

Use VMC As Vertical Lathe With Spindle-Mounted Chuck - Northfield
Northfield Precision Instrument’s Model 350 three-jaw air chuck mounts to a BT-30 VMC and is modified for spring clamp/air open. With TIR. of 0.0001", the 3" diameter chuck rotates as fast as 4,500 rpm. It is actuated via the coolant-through-spindle passage. The company says the chuck enables a standard VMC to be used as a vertical lathe with a pallet on one side for loading and unloading workpieces.

MMS Direct - Get Company Info HereNorthfield
Precision Instrument Corp.
4400 Austin Blvd., Box 550
PO BOX 550
Island Park, NY 11558-0550
Phone (516) 431-1112 Fax (516) 431-1928

Serving the Metalworking Industries. Since 1928.
MMS Online and all contents are properties of Gardner Publications, Inc.
All Rights Reserved.