Mastercam
Published

The Mobile Cobots Are Coming

Otto Motors, Yaskawa America and Mobile Industrial Robots are stretching the limits of collaborative robotics for the shop floor by adding autonomous mobility.

Share

Collaborative robots, or “cobots,” may soon be not only known for their ease of programming and safety controls with part picking/placing and machine tending, but also for their ability to pick up and transport payloads around the shop floor, among human workers, completely autonomously.

That’s the idea behind such robots as Otto Motors’ Otto 100 and 1500 models, which are primarily designed for material handling, but are being developed for other applications as well.

Intended to carry palletized loads, these robotic vehicles can autonomously map their surroundings for safe, intelligent pathfinding through a facility. Basically, these robots adapt technology similar to the kind seen in Google’s self-driving cars, but for indoor, industrial applications. In fact, Director of Industrial Solutions Simon Drexler says that Otto Motors “is on trend to have more autonomous miles driven than the Google driverless car.” Early adoption of the Otto concept by customers like GE and John Deere is expected to put more self-driving vehicles (SDVs) in manufacturing and distribution facilities by the end of 2016 than Google will have on outdoor roads.

In the video below, the Otto 100 (with 100-kg payload) carries a light shelving unit, while the Otto 1500 (with 1,500-kg payload) uses its lift configuration to dock with a pallet for transport.

Forming a "Mental Map" for Safe, Autonomous Navigation

Just as human beings receive data about their environment and form a “mental map” to find their way, these self-driving vehicles take in data using their laser scanners and form a map for autonomous navigation. According to the company, it’s as easy as taking the robot for an initial walk around a facility (which means manually controlling the robot). The Otto 1500 uses two LiDAR sensors (one on the front and one on the rear) to scan the environment as it goes. “Once it has that reference map, it can freely navigate from any origin to any destination inside of the mapped parameters,” says Drexler. This initial reference map is uploaded to the Clearpath App, enabling users to update, edit and track it. Additional Otto robots use the same map, meaning the initial scanning process need only be performed once. 

The Clearpath OS is said to enable the robots to move about using only their onboard sensors, eliminating the need for any magnetic tape, beacons or additional infrastructure (though some applications might require high-precision targets for docking, like in the video above). The same scanners that build the reference map can also identify objects and people, enabling the robot to safely stop before obstacles and dynamically figure out alternate paths to reach its destination. The Dispatch App, which enables path editing for repeated tasks as well as on-the-fly task dispatch, can be set up on a PC or tablet. The interface centrally manages a shop’s entire Otto fleet, providing a point-and-click, drag-and-drop platform for robot orders.

The Otto robots carry a NTB 56 safety certification and are designed with the idea that these will serve as a form of mobile collaborative robot, not just a point-A-to-point-B currier. Drexler says that one of its automotive customers has certified its robots for navigation on the same paths as its human workers: “Rather than treating [the robot] like a vehicle or a fork truck, they’re treating it like a member of the workforce so it can navigate and move around its human partners.”

Adding a Robot Arm and End Effector

While the robots are currently targeted at the material handling industry, there are already efforts being made to bring them into a wider set of applications. Otto Motors recently entered into a research effort with Yaskawa to develop a mobile manipulator solution, the prototype of which has been shown at trade shows already.


 

The prototype uses the Otto 1500 with Yaskawa America MH12 robot arm and a Robotiq 2-Finger 85 gripping end effector along with a wrist camera for machine vision. This produces an autonomously mobile robot arm with a 1.4-meter reach and 12-kg payload that can communicate with other machines via a wireless direct connection to a PLC.

As explained in a blog post by Mathieu Bélanger-Barrette of Robotiq, the research project is still in development, but it seems to have potential for bin packing, process-specific manipulation and mobile machine tending.

Automating the Undefinable

Otto Motors isn’t the only developer of self-driving, autonomously navigating robots for indoor, industrial use. Mobile Industrial Robots has also developed a small mobile robot, the MiR100, which, similar to the Otto 100, has a 100-kg payload. It can also tow loads weighing as much as 300 kg. Like the Otto 100 and 1500, it appears that the MiR100 is also capable of safe, autonomous navigation, with software compatible with PCs, tablets and smartphones.

Collaborative robots are clearly diversifying and proliferating as a more and more common way to streamline manufacturing, as was quite evident at IMTS. Drexler, referring to his previous experience with an automation supplier, recalls: “One of the things we used to say is, if you can define it, you can automate it.” What technology like Otto Motors’ and Mobile Industrial Robots’ SDVs is showing is that the limits of what can be automated is now stretching beyond what can be well defined to include what has heretofore been considered undefinable.

This blog post was originally published at techspex.com

Pat Mooney Saws
Take back your time with Fastenal's help!
Schunk
Mastercam
Methods
Kyocera
Hyundai WIA SE-SY Series
TCI
IMTS 2024
Horn USA

Related Content

Automation

View From My Shop Video 1: A Deep Dive Into Automation with Advance CNC

Advance CNC leverages multiple forms of automation to increase its milling machines' productivity. Learn more in this episode of The View From My Shop.

Read More
Basics

Choosing a Five-Axis Machine Tool With Automation in Mind

While much focus is placed on the machinery that moves parts, the features most important for automating five-axis machining are arguably found in the machine tool itself.

Read More
Five-Axis

CNC Machine Shop Honored for Automation, Machine Monitoring

From cobots to machine monitoring, this Top Shop honoree shows that machining technology is about more than the machine tool.

Read More
Automation

Partial Automation Inspires Full Cobot Overhaul

Targeting two-to-four hours of nightly automation enables high-mix manufacturer Wagner Machine to radically boost its productivity past a single shift.

Read More

Read Next

Turn/Mill

5 Tips for Running a Profitable Aerospace Shop

Aerospace machining is a demanding and competitive sector of manufacturing, but this shop demonstrates five ways to find aerospace success.

Read More

3 Mistakes That Cause CNC Programs to Fail

Despite enhancements to manufacturing technology, there are still issues today that can cause programs to fail. These failures can cause lost time, scrapped parts, damaged machines and even injured operators.

Read More
Kyocera