Dovetail Vise-Clamping Component - 11/11/2009

AME says its dovetail vise clamping component is useful for a variety of applications and industries, especially aerospace aluminum milling applications. Precision bushing holes are designed for quick and easy location of the vise, the company says.

Hexagonal Pole Magnets - 11/11/2009

A line of electro-permanent workholding magnets from SAV North America is designed to accommodate a range of material sizes and shapes for milling operations. HEX Pole milling magnets are said to deliver greater holding power per square inch with six-sided (hexagonal) pole configurations versus typical square-shaped magnets.

Grind Nonferrous Materials On A Magnetic Chuck - 11/3/2009

Mitee-Bite’s VM100 vacuum system is primarily designed for grinding nonferrous materials on a magnetic chuck. The system, which can be used as a pallet changer, accepts a standard 14" × 12" vacuum pallet.

Grind Nonferrous Materials On A Magnetic Chuck - 11/3/2009

Mitee-Bite’s VM100 vacuum system is primarily designed for grinding nonferrous materials on a magnetic chuck. The system, which can be used as a pallet changer, accepts a standard 14" × 12" vacuum pallet.

High Speed Balancing Chuck - 11/3/2009

Northfield Precision Instrument’s high speed balancing chuck locates a universal joint using built-in V-blocks and two diaphragm jaws. The jaws and blocks center the workpiece while two arms slide down to face clamp.

Urethane Grippers Provide Secure Holding, Surface Protection - 11/3/2009

Available from Fixtureworks, Fairlane Products’ Sof-Top urethane grippers combine secure workholding with protection for finished surfaces in assembly, machining, inspection or repair operations. The “bubbled” texture of the urethane top offers firm holding and allows air to escape so no suction is created between the contact surface and the top of the rest pad as it is compressed.

Expanding Bush Design Workholding System - 11/3/2009

Emuge’s System SG expanding bush design workholding solution is suited for hobbing, shaping and shaving operations for gear production, as well as milling and inspection operations. The design is based on a series of short tapers that expand or contract when acted upon by an axial force.

Chuck For Machining Cast Or Hardened Parts - 11/3/2009

Hainbuch’s TOPlus chuck for machining cast or hardened parts is equipped with a hexagonal core made of cast resin. This makes the chuck lighter than steel chucks, resulting in lower inertia during high spindle acceleration.

One Clamping Module For Virtually All Workpieces - 11/3/2009

The Kontec KSC from Schunk is a multi-functional manual clamping system that can be adjusted for conventional clamping; five-sided machining with low clamping depths; molded parts; plates; or workpieces with saw-cut surfaces. Its design facilitates the assembly of high supporting jaws for five-axis machining.

Modular Vise Available With Optional Mounting Patterns - 11/3/2009

Stevens Engineering’s 626 modular vise is a versatile workpiece clamping device for VMCs and HMCs. Originally designed to mount directly to a subplate or tombstone with the company’s standard grid pattern, it is now modified to fit alternative grid patterns.

« Prev | Page 1 of 26 | Next »