Drop Trunnion Tilting Rotary Table
Distributed by Koma, the Tsudakoma RT-111,AA drop-trunnion tilting rotary table features a design in which the top surface of the spindle is the center line of the tilt axis. Two pneumatic rotary joints on the rotary axis allow automated clamping/unclamping of the System 3R chuck and pallet system.
Distributed by Koma, the Tsudakoma RT-111,AA drop-trunnion tilting rotary table features a design in which the top surface of the spindle is the center line of the tilt axis. Two pneumatic rotary joints on the rotary axis allow automated clamping/unclamping of the System 3R chuck and pallet system. The trunnion table can also be equipped with chuck and pallet systems from Hirschmann, Erowa and various other manufacturers.
Related Content
-
Medical Shop Performs Lights-Out Production in Five-Axes
Moving to five-axis machining enabled this shop to dramatically reduce setup time and increase lights-out capacity, but success relied on the right combination of workholding and automation.
-
Lean Approach to Automated Machine Tending Delivers Quicker Paths to Success
Almost any shop can automate at least some of its production, even in low-volume, high-mix applications. The key to getting started is finding the simplest solutions that fit your requirements. It helps to work with an automation partner that understands your needs.
-
When To Use A Collet Chuck
Don't assume the standard chuck is the right workholding for every lathe application.
