Haas St-10Y Compact Turning Center Includes Milling Capabilities

Originally titled 'Compact Turning Center Includes Milling Capabilities'

Haas’ ST-10Y compact turning center features 4" off-center milling, drilling and tapping capabilities.

Related Suppliers

Find more information about:

Haas’ ST-10Y compact turning center features 4" off-center milling, drilling and tapping capabilities. High-torque live tooling and a servo-driven C axis are standard for four-axis cutting. Other features include a 9" × 14" (229 × 356 mm) maximum capacity; 16.25" (413 mm) swing; ±2.00" (±50.8 mm) Y-axis travel; a 15-hp (11.2 kW) vector drive; a 6,000-rpm, A2-5 spindle; and a 6.5" (165 mm) chuck, among others. 

Editor Pick

Robotic Cell Cuts Cycle Time, Improves Part Quality

Sew-Eurodrive Inc. worked with Okuma America’s authorized systems dealer, Gosiger Automation, to design an automated cell that includes an automatic, magazine bar feeder that loads 6-ft. lengths of barstock into the machine. The shop also switched to an Okuma twin spindle, twin turret turning center so all of the machining operations are completed in one setup, thus eliminating additional fixtures and operator intervention. The resultant system reduces cycle times and requires much less operator involvement. As a result, production time per part was more than cut in half – from about 5 minutes to 2 minutes, 20 seconds.