High-Performance Tap

The MultiTAP is designed to cut a range of materials including carbon steel, steel alloys, stainless steel, aluminum, cast iron, copper, brass and bronze.

Related Suppliers

Find more information about:

The MultiTAP is designed to cut a range of materials including carbon steel, steel alloys, stainless steel, aluminum, cast iron, copper, brass and bronze. The tap is designed to produce threads within both 2B and 3B classes of fit.
 
The tap is constructed of a grade of high speed steel (HSS-E), Nitrided with a Ne2 surface treatment. It is available in both spiral point and spiral flute configurations for through- or blind-hole applications. Tap sizes cover a full range for UNC or UNF threads, from #4-40 to ¾"-16" in inch sizes, to metric sizes from M4 × 0.7 to M16 × 2.0.
 
According to the company, the tap is designed for a job shop or a manufacturer that works with short- and medium-run threading applications across a spectrum of materials.

Editor Pick

PCD Face Milling System’s Diameter Cuts Large Parts in Fewer Passes

The KBDM polycrystalline diamond (PCD) face milling system from Kennametal is designed for high-volume machining, with standard sizes ranging from 2.5" to 8.0" (63 to 200 mm) and cutter diameters ranging to 21.5" (550 mm).