The Syncrono 2D laser cutting system is available with Prima’s CV5000 laser resonator. Designed for high cutting speeds, the CV5000 increases productivity, cuts thicker materials and produces a quality cut with a reduced heat-affected zone, the company says.
The system features a special laser head that includes two additional linear-driven, parallel kinematic axes on the moving gantry, creating a “machine within a machine.” This allows the cutting head to cut at an acceleration ranging to 6 G. This enables the laser system to cut more than 1,000 holes per minute.
The system is available with a fully loaded material handling system consisting of a 10- or 15-shelf storage pallet loading/unloading unit; an automatic arm with pick-up device and suction cup loading; a double-sheet thickness control device; a sheet metal separation unit; a controller; and standard protection barriers. The continuously working system feeds production as it removes and stacks part. The addition of an automatic loading/unloading system can increase production, reduce manual labor and permit “lights-out” manufacturing. According to the company, its vibration-free design and a constant beam path through the 60″ × 120″ work area provide accurate, reliable cutting, even in small and intricate profiles.
Editor PickWaterjet Intensifier Pump Reduces Water, Power, Abrasive Usage
Jet Edge’s 100-hp, 75-kW X-Stream xP90-100 waterjet intensifier pump supports 75-KSI (5,200 bar) continuous operating pressure.