Published
Milling Cutter for Roughing, Finishing Cast Iron
Sumitomo Electric Carbide says its SumiMill Goalmill milling cutter accurately finishes cast iron.
Sumitomo Electric Carbide says its SumiMill Goalmill milling cutter accurately finishes cast iron. The cutter is said to provide quality surface finishes through the use of tangentially mounted inserts accompanied by easily adjustable, axially mounted wiper inserts. Each insert offers eight indexes when using single-handed cutters. Four indexes can be used on the periphery pockets, and flipping the insert on its side enables four more indexes in the finishing cartridge. A total of 12 indexes can be used when employing both right- and left-handed cutters.
The cutters are available for roughing (<50Rz) semi-finishing (<18Rz) and finishing (<12.5Rz). Left-handed cutters are made to order.
The cutters are available for roughing (<50Rz) semi-finishing (<18Rz) and finishing (<12.5Rz). Left-handed cutters are made to order.
Related Content
-
10 Tips for Titanium
Simple process considerations can increase your productivity in milling titanium alloys.
-
All-Around Mill Improves Productivity and Cost for Valve Job
Adopting a mill with a double-negative rake and pockets compatible with multiple insert geometries enabled Progressive Metal Service to increase feed and lower scrap rates for a valve.
-
Widia Introduces Solid End Mill for Shoulder and Side Milling
The WCE solid end milling series features a five-flute geometry specifically designed for optimal performance when shoulder milling and side milling carbon, stainless steel and cast iron.