Toolholding System Offers High Performance at Fast Speeds
Parlec’s high-performance Eros toolholding system is said to offer high velocity, improved cutting performance and longer tool life.
.jpg;width=70;height=70;mode=crop;format=webp)
Parlec’s high-performance Eros toolholding system is said to offer high velocity, improved cutting performance and longer tool life. The design of the collet seat and collet nut combined with tight tolerances promote high gripping force. The chuck body and nut utilize two pilot diameters, one above and one below the threads, to give the nut the best radial position to the seat and avoid clamping distortion. The holders are balanced to G2.5, and the aerodynamic design of the nut enables high performance at fast speeds without unbalance or vibrations, the company says. The toolholding system is said to provide concentricity of less than 0.00012" at 3×D.
Related Content
-
Quick-Change Collet Chuck Doubles as Mandrel
The hybrid Comot-AZ quick-change collet chuck from SMW Autoblok can be used for OD machining and can be transformed into an expanding mandrel for ID clamping using the EMX series.
-
Big Daishowa Chuck Eliminates Chatter in Milling Operations
The Mega 12DS chuck is designed for trochoidal milling with anti-vibration end mills.
-
T.J. Davies Retention Knobs Maximize Cutting Tool Life
Custom-made retention knobs are sized to fit the machine tool and spindle or toolholder to extend the life of existing machine tool assets.
