Variable-Speed Lathe Features Digital Display

Grizzly Industrial’s 10" × 22" G0752 lathe features an electronic variable-speed spindle control with a digital display that enables speed changes while the lathe is running.

Related Suppliers

Find more information about:

Grizzly Industrial’s 10" × 22" G0752 lathe features an electronic variable-speed spindle control with a digital display that enables speed changes while the lathe is running. The lathe is capable of cutting threads with inch pitches from 8 to 72 threads per inch and metric pitches from 0.25 to 3.5 mm. Spindle speed ranges from 100 to 2,000 rpm. A 5" three-jaw chuck features two sets of jaws, while a 6 1/2" four-jaw chuck features reversible jaws. The lathe is equipped with an 8" faceplate, steady rest with 1/4" to 2" capacity, follow rest with 1/4" to 2" capacity, four-way toolpost and MT #3 dead center. Additional features include a hardened and ground V-way bed, oil-bath gearbox, chip tray, and backsplash.

Editor Pick

Robotic Cell Cuts Cycle Time, Improves Part Quality

Sew-Eurodrive Inc. worked with Okuma America’s authorized systems dealer, Gosiger Automation, to design an automated cell that includes an automatic, magazine bar feeder that loads 6-ft. lengths of barstock into the machine. The shop also switched to an Okuma twin spindle, twin turret turning center so all of the machining operations are completed in one setup, thus eliminating additional fixtures and operator intervention. The resultant system reduces cycle times and requires much less operator involvement. As a result, production time per part was more than cut in half – from about 5 minutes to 2 minutes, 20 seconds.