Contact Information
Please visit:
www.ats-s.com
Phone:
949-888-1744
Toll-Free:
800-321-1833
Fax:
949-888-8336
Mailing Address:
30222 Esperanza
Rancho Santa Margarita,
CA
92688
A Special Message from
ATS Systems
A COMPLETE MANUFACTURER OF PREMIUM WORKHOLDING AND AUTOMATION SYSTEMS
ATS Collet Chuck
|
-Innovative patented design
-Fixed collet position ensures linear accuracy
-Ideal for secondary operations, sub-spindle applications and parts transfers
-Works with barfeeders when using a turret stop
-Utilizes standard C, J and Patented S-Style with special 7º nose taper
-Capacity range from 1/16" to 4"
-Reduced body diameter and elimination of the nose cap allows for greater tool clearance
-Adjustability feature enables you to adjust for T.I.R.
-Custom Solutions Available
|
|
ATS ML Series Barfeed
|
-Reliability by Design
Proven Mechanical Design
Proven Servo Motors
Proven Control Interface
Best Warranty Available
-Advanced User-Friendly Technology
Intuitive, hand-held programming
Direct connect feature
Trouble shooting diagnostics
-Improved Planning for Unattended Operation
Simplified Production Planning
Measured Productivity Improvement over Time
Availability of Critical Data
|
|
ATS Ultimate Chuck™
|
The Solution for First Operation Chucking
-A few sets of jaws quickly adjust to cover a wide diameter range
-Change, adjust or reverse all three jaws in one minute
-1/4 turn wrench, no T-nuts or bolts
-Adjust hard jaws in and out to any diameter
-Only three sets of "Deep Bite Job Shop" hard jaws cover full grip range OD and ID
-Stop using inadequate grip soft jaws for roughing operations
-"Deep Bite Job Shop Jaws" transmit torque for maximum metal removal
The Solution for Second Operation Chucking
-Eliminate Soft Jaw Reboring
-Save 45 minutes of changeover downtime
-Bore jaws only once, store for weeks or months, reinstall with 0.0005” TIR guaranteed without reboring (7” to 12” chucks, 16” chuck 0.0007” TIR)
|
Company Profile
In 1978, Bill Murphy was in need of a Collet Chuck to work with Warner & Swasey collet pads. He ordered one as an accessory to a new machine and, after 6 months waiting for delivery on the chuck he decided to make one himself. After using it a short time, he noticed it was improving his machine's efficiency. He decided to try a 5C collet chuck too. They were really hard to come by, never being readily available off the shelf. This too was a great product; his friends saw it and started asking him to make them for their machines. From there it proliferated. Bill and Wes Bakke decided to start a company that manufactured and inventoried collet chucks for the entire manufacturing industry. Advanced Tool Systems officially opened its doors March 1, 1981.