Click Change, Inc. Showroom: MMSOnline.com

Contact Information

A Special Message from Click Change, Inc.

The Click Change, Fastest Tool Holders In The West...East...North...South!

5 Second Insert Changes
Rock-Solid insert clamping
Uniform clamping pressure
No threads to strip out
No screws to break
No wrenches to lose
No over-tightening
All common sizes available
Far less skill required
No parts to replace
No wear components

Deep Links

Styles Available: The Click Change Insert Holder is being offered in all popular insert shapes, sizes, and orientations. The most common configurations are available now, with other varieties becoming available soon. The table below lists the configurations that we have in stock, or in build. Please feel free to contact us with your specific questions. Patent Pending Available Tool Holders CNMG The CNMG is the most common insert type. The popular styles are currently available for the 430 size inserts. The 530 size is not yet supported. Shank sizes are from 3/4 to 1-1/4. Both right and left hand models are available. AVAILABLE NOW in 3/4 and 1 inch. Top Notch Both the Kennametal Top Notch and the Iscar Top Clamp are supported in the No. 3 size. Shank sizes are from 3/4 to 1-1/4 and right and left hands are supported. AVAILABLE June March 1, 2007 VNMG The VNMG for the 330 size inserts in shank sizes from 3/4 to 1-1/4 and right, left, and neutral hands are AVAILABLE NOW. WNMG The WNMG for the 430 size inserts. Shank sizes are from 3/4 to 1-1/4. Right and left hands are AVAILABLE NOW. DNMG The DNMG for the 430 size inserts. Shank sizes are from 3/4 to 1-1/4 and right, left, and neutral hands are available March 2007. RNMG The RNMG for 430 size inserts. Shank sizes are from 3/4 to 1 and right, left, and neutral hands are available April 2007. TNMG The TNMG for 430 size inserts. Shank sizes are from 3/4 to 1-1/4 and right, left, and neutral hands are available May 2007. SNMG The SNMG for 430 size inserts. The 530 size in not yet supported. Shank sizes are from 3/4 to 1-1/4 and right, left, and neutral hands are available May 2007. The Click-Change, Fastest Tool Holders in the West!........ East........North.....South....
Specifications: The Click Change Insert Holder is not just another device to hold a carbide insert. It is a productivity enhancement tool. Like an electric drill instead of a hand drill, or an air wrench instead of a hand ratchet. Patent Pending The Click Change Holder will dramatically improve the productivity of machining operations. Operators will be less frustrated, machine uptime will improve, and repair costs will go down. With a conservative savings of two minutes per tool change, the return on investment is measured in weeks. Operational Specifications Clamping pressure at the insert. 8,000 PSI Manual force required to release insert clamp. 8-10 Lbs. Manual force required to engage insert clamp. 3-5 Lbs. Ratio of downward holding force to pull-back force. 1:1 Body material. A2 Tool Steel Mechanism component materials. A2 Tool Steel All components hardened. HRC 58-60 Theoretical Drive Spring life. 250,000 cycles Recommended lubrication interval. 2 years. Internal adjustments or settings. none Wear components. none Insert thickness tolerance. +/- .005" Insert geometry limits. ANSI Standard. Cutting Fluid Compatibility All Known Fluids
Order Now: http://www.click-change.com/CC-Order.html

As Seen in MMS

Lathe Toolholder Allows Quick Insert Changes 12/10/2008
This lathe toolholder allows insert changes in a matter of seconds with the push of a button. Its cam-actua...