SHOWROOM

Calmotion LLC



Phone: 818-357-5826
Fax: 818-286-1914

Please visit: Calmotion LLC

Mailing Address:
21720 Marilla Street
Chatsworth, CA 91311 US



A Special Message from Calmotion LLC

New USBCNC

Universal Serial/USB controller for Fanuc, Fadal, Siemens, Haas, Mitsubishi,... CNC Machine Tools. Provides USB memory connectivity for file upload, download, and drip feed operation. (DNC software integrated into controller) Call or email for more info.


Product Categories of Calmotion LLC

  • Communications Networks, & Data Transmission Equipment
  • Direct or Distributive Numerical Control (DNC) Systems
  • Indexers & Rotary Tables
  • Memory Units

Trade Names

  • 5C-FAD
  • 5C-FAN
  • LANCNC-FAD
  • USBCNC
  • USBCNC-FAD
  • USBCNC-FAD-SW
  • USBCNC-INT

Deep Links

As seen in MMS

Tilting Rotary Table Enables Five-Axis Machining
Calmotion’s TR-7 tilting rotary table enables three-axis vertical machining centers to achieve five-axis machining of complex workpieces and reduce setup time, increasing productivity.

Rotary Table Head's Air Collet Closer Eases Setup
Calmotion's Quad 5C rotary table head holds small parts using a conventional 5C collet or chuck.

Device Rejuvenates Legacy Control System
An old but still very usable vertical turning center became easier to operate, and actually realized more cutting time, thanks to a control retrofit that cost only hundreds of dollars.

Controller For Virtually All CNCs
Calmotion says its Lancnc controller provides fast drag-and-drop, bi-directional file transfers between virtually any CNC and PC on a network without additional software. Also, the controller uses a 2-GB secure digital (SD) card to store programs at the CNC, allowing access to program information without using network resources.

Rotary Table Absorbs High Shock Loads
Calmotion’s 5C rotary table is pre-wired for Fanuc and Fadal CNCs. The rotary table is designed to absorb higher shock loads—especially axial loads—and eliminate leaky seals, thereby increasing its life, the company says. The table features heat-treated steel and throated helix gears which increase the contact area.

Controller For Fadal CNCs
  The LANCNC-FAD controller allows drag-and-drop, bi-directional file transfers between Fadal CNCs and network servers without additional software. The controller uses a Secure Digital (SD) card to capture programs from the network server, allowing drip-feed programs to continue even if the network crashes. The

USB Reader Inputs CNC Programs From A Flash Drive
USB flash memory devices (also called flash drives or data sticks) are a convenient way to move files from a laptop to a desktop PC, from a camera to a PC and so on. They can also be handy for storing and moving part programs for CNC machines on the shop floor.

USB Connectivity For Fadal CNCs