Jenoptik Industrial Metrology

1505 W Hamlin Rd.
Rochester Hills, MI 48309 US

Connect

A Message from Jenoptik Industrial Metrology

Company Profile

Your partner for industrial metrology   Jenoptik Industrial Metrology is a leading manufacturer and system provider of high-precision, tactile and nontactile production metrology.

Jenoptik Industrial Metrology: Your global source for precision measurement

  Know the facts about your production parts with air gaging, contact, and optical measurement solutions--standard measuring systems or custom systems--all from a single global source focused on helping control processes and improve part quality in the laboratory, in-process and post-process applications, in-line and off-line gaging.

Jenoptik Industrial Metrology: Your global source for precision measurement

Roundscan permits automatic measurement of form and roughness characteristics in one measuring run.

Jenoptik Industrial Metrology: Your global source for precision measurement

The Opticline noncontact CNC shaft gaging system for measuring form, dimensional, and positional tolerances of shaft-type parts in submicron detail, recording results instantly.

As Seen In Modern Machine Shop

Jenoptik Automotive IPS 400 Inspection System

Optical Inspection Device Automatically Detects Defects
Jenoptik Automotive introduces the IPS 400 for rapid optical surface inspection of flat machined surfaces.

Jenoptik Industrial Metrology Hommel-Etamic Opticline

Optical Measurement System Sealed for Shopfloor Use
Jenoptik Industrial Metrology’s Hommel-Etamic Opticline single-camera optical measurement system is designed to measure workpieces as large as 80 mm in diameter without any loss of resolution.

Jenoptik Industrial Metrology Hommel-Etamic Opticline

Optical Measurement System Sealed for Shopfloor Use
Jenoptik Industrial Metrology’s Hommel-Etamic Opticline single-camera optical measurement system is designed to measure workpieces as large as 80 mm in diameter without any loss of resolution.

Jenoptik Industrial Metrology Hommel-Etamic Opticline

Shaft Measurement Machine Fit for the Shop Floor
Jenoptik Industrial Metrology introduces the Hommel-Etamic Opticline series of optical shaft measuring devices.

Jenoptik T8000

Measurement System Eliminates Shadow-Type Inspection
For Keystone Powdered Metal Co., tooling inspection was time-consuming and not highly repeatable. To solve this problem, the company used Jenoptik's T8000 RC automatic universal roughness and contour measurement system.

Embracing Engineering
Investing in systemization is not just for large or dedicated manufacturers. Trends a metrology company is seeing apply to manufacturing in general as well.

Hommel-Etamic Wavemove CNC measuring station

Automated System Measures Roughness, Contour Simultaneously
The Hommel-Etamic Wavemove CNC measuring station from Jenoptik Industrial Metrology combines high-precision measurement with eight fully automatic movable axes to measure both roughness and contours in a single run.

Jenoptik will use its measuring devices and software to help shops make better quality parts

The Road to Better Parts
Jenoptik Industrial Metrology is asking U.S.-based manufacturers to bring their quality challenges to its experts as part of its 2014 road show event: The Better Parts Challenge. The company will use its measuring devices and software to help shops make better quality parts and potentially reduce production costs.

Jenoptik W10 surface roughness measuring system

Surface Measurement System Provides Mobility
The light, compact Jenoptik W10 mobile surface roughness measuring system features a long-lasting battery for taking measurements on the production line or shop floor.

Jenoptik Wavemove from Hommel-Etamic automated surface roughness and contour measuring system

Automated CNC Measuring System Evaluates Surface Roughness and Contour
The Jenoptik Wavemove from Hommel-Etamic is an automated surface roughness and contour measuring system.

In-line Contour Inspection at High Speeds
The Opticline contour automatic production metrology system is designed to enable quick inspection of shaft contours with high accuracy and reliability.

Form And Roughness Measurement In One Pass
Hommel-Etamic introduces the Roundscan, a scanning system that combines automatic measurement of form, cylindricity and roughness characteristics in one measuring instrument. The system is designed for ergonomic use by featuring a rotating and height-adjustable work area.

optical device

Vision System Allows Automated Inspection Of Bore Finish
Bores machined in brake master cylinders, connecting rods, injection systems, valves and similar components must have a quality surface finish to ensure effective performance. Conventional bore inspection techniques, however, typically require an operator to evaluate the finish. Operators may use a bore scope l

Air-bearing assists move the gage

Supersized Surface Profiling System Inspects Large Bearings
A system for measuring bearings up to 84 inches in diameter involves moving the gage and granite surface plate to the workpiece with air-bearing assists.

Product Categories of Jenoptik Industrial Metrology

Flatness Measuring Equipment
Flaw Detection Equipment
Gages - Digital
Gages - Mechanical
Gear Inspection
Laser Measurement Systems
Probes, Electromechanical
Roundness Measuring Equipment
Surface Finish Measuring Equipment
Vision Systems

Trade Names

Movomatic
Nanoscan
Opticline
Roundscan
Shaftscan
W5

Back to showroom


The W5 for wireless surface finish measuring.

Jenoptik Industrial Metrology: Your global source for precision measurement

 

Know the facts about your production parts with air gaging, contact, and optical measurement solutions--standard measuring systems or custom systems--all from a single global source focused on helping control processes and improve part quality in the laboratory, in-process and post-process applications, in-line and off-line gaging.

The W5 portable, wireless,surface measuring tool is the easiest to use and packed with capability. Lighter and smaller than the competition, it still has room for a large easy-to-read 2” color display. The W5 is capable of more than 800 measurements on a single battery charge. Class 1 accuracy!

 

Back to showroom


Hommel-Etamic Roundscan

Jenoptik Industrial Metrology: Your global source for precision measurement

Roundscan permits automatic measurement of form and roughness characteristics in one measuring run. The measuring axes include a high-precision guide so that profile and waviness as well as roughness parameters can be evaluated.

Back to showroom


Opticline

Jenoptik Industrial Metrology: Your global source for precision measurement

The Opticline noncontact CNC shaft gaging system for measuring form, dimensional, and positional tolerances of shaft-type parts in submicron detail, recording results instantly. Easily programmed, the Opticline is ready to handle future parts, too. From cylindrical shafts, to cam- and crankshafts.

Back to showroom

Company Profile

Your partner for industrial metrology

 

Jenoptik Industrial Metrology is a leading manufacturer and system provider of high-precision, tactile and nontactile production metrology. The range of products provided include total solutions for a wide range of measurement tasks such as testing surfaces, form, and determining dimensional tolerances – throughout all phases of the production process, for final inspection or in a metrology lab. Our product portfolio is rounded off by a wide range of services in consulting, training and service, including long-term maintenance contracts. We operate sales and engineering offices worldwide.