Diamond Innovations Inc.

6325 Huntley Rd.
Worthington, OH 43085 US

Connect

As Seen In Modern Machine Shop

The New Rules of Cutting Tools
Cutting tool technology is evolving rapidly—responding to both changing production demands and more challenging workpiece materials. Machine shops and machining facilities today need to look at their cutting tools differently. They also need to look at cutting tool suppliers differently. This series of articles on the new rules of tooling was provided by Diamond Innovations, Precision Dormer and Sandvik Coromant.

hard turning image

The New Rules of Cutting Tools -- Introduction
(Advertorial) Cutting tool technology is evolving rapidly to respond to changing demands and more challenging workpiece materials. Shops today need to look at cutting tools differently. They need to look at cutting tool suppliers differently as well.

sandvik 1-2

The New Rules of Cutting Tools -- Rule #1: Do More With Your Machine
 (Advertorial) The tooling has the potential to transform the process.

rule two image 2

The New Rules of Cutting Tools -- Rule #2: Demand Application Expertise
(Advertorial) The support of a knowledgeable tool supplier should be part of what you purchase with the tool.

Rule 3 image 2

The New Rules of Cutting Tools -- Rule #3: Diamond Should Not Be Rare
(Advertorial) Consider PCD or CBN wherever capacity is tight.

tool cost vs. speed increase

The New Rules of Cutting Tools -- Rule #4: Focus on the Biggest Sources of Expense
(Advertorial) Labor and machine time are where the real costs occur. The tool cost is tiny compared to the savings it delivers in these areas.

rule 5 image 1

The New Rules of Cutting Tools -- Rule #5: Consider the Cutting Tool from the Very Beginning
(Advertorial) Are you specifying the right machine? You can’t know until you know what tools you will use.

Product Categories of Diamond Innovations Inc.

Abrasive Compounds & Slurries