INDEX Corporation

14700 N Pointe Boulevard
Noblesville, IN 46060 US

A Message from INDEX Corporation

Company Profile

The INDEX Group is one of the leading precision CNC turning machine manufacturers worldwide.

INDEX TRAUB:  World Leaders in Precision Turning Technology

The new 65mm R200 Turning/ Milling Center produces precision workpieces nearly twice as fast as any conventional turn-mill.

INDEX TRAUB:  World Leaders in Precision Turning Technology

Quick and precise with a huge tool capacity: The surprisingly affordable TRAUB TNL18 is a sliding headstock automatic and a CNC single-spindle bar automatic in one.Changing over in only minutes, the TNL18 can put 3 tools in the cut at once, features a quick-positioning top tool turret with a larger tool capacity than any gang carrier--up to 24 tools--and chip-to-chip time of 0.3 sec.

INDEX TRAUB:  World Leaders in Precision Turning Technology

The INDEX MultiLine combines the benefits of traditional high production multispindle automatics with the benefits of modern CNC technology.

As Seen In Modern Machine Shop

Index PMTS

Redesigned Turn-Mill Fits More Performance in Same Footprint
PMTS 2017: Index will demonstrate its G200 turn-mill, a compact machine offering as much as 30 percent greater productivity than its predecessor in the same footprint.

Index Traub ABC

Automatic Lathe Comes “Industry 4.0-Ready”
The new generation of Index’s ABC automatic lathe is designed for turning simple to moderately complex parts in cycle times as much as 15 percent faster than the previous generation, with rapid spindle acceleration (8 G), shorter spindle ramp-up times, higher rapid traverse rates and quick chip-to-chip times.

Index Traub G220

Turn-Mill Includes Motorized, Five-Axis, 18,000-rpm Milling Spindle
Index’s G220 turn-mill includes a motorized five-axis, 18,000-rpm milling spindle and a tool turret with Y axis.

Traub TNL31-11 Automatic Lathe

Automatic Lathe Features Front-Working Attachment
The Traub TNL31-11 automatic lathe available from Index features a front-working attachment on an additional cross-slide moving in the X and Z axes, providing freely positionable tools.

Index MS16 Plus Six-Spindle CNC Lathe

Six-Spindle CNC Lathe Features Modular Design
Index’s MS16 Plus six-spindle CNC lathe features a modular design.

Index MS16

New Compact CNC Multi-Spindle Lathe
Sponsored Content – IMTS 2016 Technology eNewsletter

Index MS22C-8

Lathe More Efficient with Eight Spindles
Sponsored Content - IMTS 2016 Technology eNewsletter

Index G220

New Turn-Mill with Bevel Gear Capability
Sponsored Content – IMTS 2016 Technology eNewsletter

Index C100

Turn-Mill Cuts Cycle Times
Sponsored Content - IMTS 2016 Technology eNewsletter

Index Traub TNL32-11

Turning Center’s Dual Drive Train Speeds Tool Transitions
The Traub TNL32-11 sliding/fixed headstock automatic lathe has a headstock movable in the Z axis, an upper and identical lower turret with X, Y and Z axes, and a counter spindle movable in the X and Z directions.

Index MS16 Plus lathe

Six-Spindle Turning Center Provides 27 NC Axes
Index’s MS16 Plus lathe accommodates parts as large as 22 mm in diameter and is capable of turning, drilling, milling, tapping, deep-hole drilling or slotting in each of its six CNC spindles.

machining a bevel gear

Hobbing Bevel Gears on a Turn-Mill Center
After deciding to manufacture bevel gears for its own purposes in-house, Index developed a “gear hobbing package” that transforms its R200 and R300 turn-mill centers into gear cutting machines.

Investing in Technology Is a Strategy. Figuring ROI Is a Strategic Tool.
This short article by Jeff Reinert, president of Index Corp., outlines the multi-step process for justifying an investment in the latest CNC machining technology. Calculating the return on investment (ROI) is a useful step in this process, but only one of the factors a manufacturer must consider in the decision to buy a new machine. Read the article here.

Index MS22C-8 turning machine

Modular Turning Center Equipped with Eight Spindles
Index will demonstrate its MS22C-8, a modular eight-spindle automatic CNC turning machine suitable for fast machining, especially of complex parts.

Index Adds Northwest Distributor
The distributor will serve Oregon and Washington customers.

Index Adds Northwest Dealer
A new distributor will serve Oregon and Washington.

Traub TNK42 lathe

Automatic Lathe Promotes High Production Rates
Developed for high-production turning, the 42-mm TNK42 fixed-headstock automatic lathe from Traub produces complex workpieces in large and medium volumes ranging to 250-mm long.

Index Announces North American Sales Manager
Former Tornos Technologies sales and marketing manager will oversee sales for Index and Traub across three countries.

Product Categories of INDEX Corporation

Automated System & Cells for Material Removal
CNC Multi-Spindle Screw Machines - New Equipment
CNC Single-Spindle Screw Machines - New Equipment
CNC Swiss Screw Machines - New Equipment
Computer Numerical Control (CNC) Software (Sold Independent of Hardware)
Toolholders
Turn/Mill Machines, CNC
Turning Centers, Horizontal, CNC
Turning Centers, Inverted Vertical, CNC
Turning Centers, Twin-Spindle/Multi-Turret
Turning Centers, Vertical, CNC
Universal Machining Centers

Trade Names

C
INDEX
MS
MultiLine
R
RatioLine
Single Spindle CNC Automatic
Single Spindle CNC Bar Machine
Six Spindle CNC Bar Machine
Six Spindle CNC Chucker
Small Turning Center
SpeedLine
TNL
TNX
TRAUB
VerticalLine
Virtual Machine
WinFlex