SHOWROOM
Jet Edge Waterjet Systems
Phone:
763-497-8700
Toll-Free:
800-538-3343
Fax:
763-497-8701
Please visit:
Jet Edge Waterjet Systems
Mailing Address:
12070 43rd St. NE
St. Michael,
MN
55376-8427
US
A Special Message from Jet Edge Waterjet Systems
Industry-Leading Waterjet Cutting Machines and Pumps
|
MID RAIL GANTRY WATERJET CUTTING SYSTEM The Jet Edge Mid Rail Gantry produces complex parts out of virtually any material. Designed to easily accommodate overhead loading, the Mid Rail Gantry features an 8'X13' work envelope and comes standard with one abrasivejet cutting head. A second cutting head can be added to increase productivity. The Mid Rail Gantry's sturdy heavy-wall tubular steel beams eliminate vibration and increase system longevity. Critical X and Y bearing components are protected with heavy metal covers with brush seals. The system's catcher tank is isolated from the motion system so energy from the cutting stream does not disrupt the mechanics of the motion system. The catcher tank features heavy gauge C channel reinforced steel side walls (stainless steel optional), replaceable steel slats (stainless steel optional), clean out couplings on both ends, an adjustable overflow to drain, and multiple C channel floor supports. The slat surface can be leveled or is adjustable. Full specifications |
|
|
|
|
|
90,000 PSI X-STREAM Xp90-100 INTENSIFIER PUMP Capable of producing pressures in excess of 90,000psi, the 100hp X-Stream achieves much faster cutting speeds and drastically lowers operating costs compared to traditional 60,000psi pumps, enabling users to increase productivity and reduce part costs. The X-Stream produces 50% more pressure than a 60,000psi intensifier pump, resulting in a 40-50% increase in productivity for many materials. The X-Stream supports a 75,000psi continuous operating pressure. Compared to a 60,000psi pump, typical operating pressures of 75,000psi use 30% less water, 30% less power, and up to 50% less abrasive, resulting in a 40% reduction in operating costs. They typically reduce taper by up to 0.001". The X-Stream is capable of producing flow rates of 1.45gpm and supports up to a .017" orifice. Its fittings and tubing are rated for 100KSI. The X-Stream is backed by nearly 10 years of extensive research and development in hyper-pressure technology. Full Specifications |
|
|
|
|
|
HIGH RAIL GANTRY WATERJET SYSTEM Jet Edge's High Rail Gantry System will produce complex parts out of virtually any material. The overhead design allows full access to the work envelope and raises the critical components out of the process environment. The stress-relieved steel fabricated frame provides unparalleled rigidity coupled with welded lightweight dynamic beams for stable but fast operation. Moving elements are supported on THK linear ways with precision duplex pair factory ground and matched bearing sets. Precision ballscrews are directly coupled to servomotors. The XY mechanical components are totally protected from the abrasivejet environment by a lip seal system. This system, which uses brushes, labyrinth passages, lip seals, and high-volume, low-pressure filtered air to protect critical motion components, provides significantly longer service life compared to conventional bellow-type arrangements. Jet Edge High Rail Gantry Systems are the most versatile ultra-high pressure (UHP) waterjet and abrasive cutting systems on the market. They cut virtually any material and can grow with your business. Full Specifications |
|
Company Profile
 |
| Corporate Headquarters - St. Michael, MN |
View Company Video Jet Edge is a leading designer, manufacturer and global supplier of ultra-high pressure waterjet and abrasivejet systems for precision cutting, surface preparation and coating removal. An industry pioneer, Jet Edge entered the waterjet market more than 20 years ago. Jet Edge systems are used around the world in a broad range of industries, from the world's leading airlines to automotive, aerospace, industrial manufacturers to machine and job shops. Jet Edge's waterjet and abrasivejet systems can cut virtually any material, from food products to hardened tool steel to titanium. Headquartered in a modern 100,000 square-foot manufacturing facility in the Minneapolis suburb of St. Michael, Minnesota, Jet Edge has sales offices throughout the United States and strategic partners in the U.K., Denmark, Italy, Dubai, Brazil, Chile, Argentina, Peru, China, Japan, Korea and Taiwan. Jet Edge Milestones 1984 Jet Edge, a subsidiary of Possis Corporation, enters the waterjet market with a 36,000 psi mobile line and 55,000 psi precision cutting line. 1994 TC/American Monorail purchases Jet Edge from Possis Corporation. 1998 Jet Edge purchases Chukar WaterJet Gantries. 1999 Jet Edge builds a new 100,000 square-foot facility and relocates to St. Michael, Minnesota. 2007 Jet Edge introduces 90,000 psi X-Stream xP90-100 intensifier pump. 2007 Jet Edge forms technical partnership with Michael Waltrip Racing. 2008 Jet Edge introduces Mid Rail Gantry Waterjet System.
Product Categories of Jet Edge Waterjet Systems
- Waterjet Cutting Machines
Trade Names
- High Rail Gantry Waterjet System
- Mid Rail Gantry Waterjet System
- X-Stream xP90-100 Intensifier Pump
Deep Links
Intensifier Pumps - Featuring a reliable tie-rod design, Jet Edge intensifier pumps lead the industry in performance!
Michael Waltrip Racing Cuts NASCAR Parts with Jet Edge Waterjet! - MWR uses their Jet Edge waterjet to cut more than 250 parts for each racecar.
Customer Success Stories - Read what our customers are saying about Jet Edge!
Precision Cutting Systems - Jet Edge is dedicated to manufacturing the highest quality waterjet systems on the market.
Product Announcements Provided By Jet Edge Waterjet Systems
90,000 PSI X-Stream xP90-100 Waterjet Intensifier Pump
High Rail Gantry Waterjet System
Low Rail Gantry Waterjet System
As seen in MMS
Intensifier Pump For High-Pressure Waterjets
Mechanism Extends Waterjet Seal Life
Jet Edge’s high-pressure fluid sealing mechanism improves waterjet seal life through metal-on-metal sealing without the use of plastic seals.
Racing Partnership Grows
Michael Waltrip Racing is cultivating its relationship with Jet Edge.
Waterjet Technologies Increase Efficiency
Featuring Jet Edge’s Permalign Edge cutting technology, the Mid Rail gantry is capable of cutting precise zero-taper parts and bevels ranging to 55 degrees in harsh industrial environments.
Jet Edge Co-Sponsors Exporting Seminar
Waterjet manufacturer Jet Edge will co-sponsor a free exporting seminar, “Exporting 101,” from noon to 4:30 p.m.
Jet Edge Cuts “Diggers” Logo
During the opening of every episode of “Diggers,” a new National Geographic TV show, treasure hunters Tim Saylor and George Wyant dig up a rusty metal logo that looks like it has been in the ground for years.
Jet Edge Manager Appointed to Export Council
David Anderson, international sales manager at waterjet equipment manufacturer Jet Edge (St.
Mexican Distributor Offers Jet Edge Waterjets
Waterjet manufacturer Jet Edge (St.
Waterjet Produces Complex Parts
Capable of producing complex parts out of virtually any material, Jet Edge’s Mid Rail Gantry waterjet cutting machine features an exposed tank that accommodates overhead loading.
Waterjet Cuts Virtually Any Material Without HAZ
Jet Edge’s Mid Rail Gantry model MR513 waterjet cutting machine can process material as large as 5 ×13 ft. and is well-suited for fabricators, machine shops, and stone and tile shops.
Waterjet Intensifier Pump Produces 3 gpm UHP Water
Jet Edge’s iP60-150 waterjet intensifier pump produces as much as 3 gpm (11.4 lpm) of ultra-high-pressure water for precision waterjet cutting and surface preparation applications.
Single- or Dual-Head Gantry Waterjet System
Capable of producing complex parts out of virtually any material, the company’s Mid-Rail gantry waterjet cutting machine features an exposed tank that easily accommodates overhead loading.
Intelligent Waterjet Pump Uses Less Electricity, Components
Waterjet manufacturer Jet Edge, along with Tecnocut S.p.A., offer the energy-efficient Ecube 6200 servo-driven, intelligent waterjet pump.
Jet Edge Opens Office in China
Normal
0
false
false
false
MicrosoftInternetExplorer4
st1\:*{behavior:url(#ieooui) }
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Waterjet manufacturer Jet Edge has opened a new sales and service office in Shanghai, China. The new location will enable the St.
Five-Axis Waterjet Cuts Virtually any Material
Jet Edge’s Idro line of five-axis precision waterjet cutting machines is capable of cutting virtually any material, the company says.
Presentation Highlights Waterjet Benefits
Waterjet manufacturer Jet Edge (St.
Jet Edge, Tecnocut Announce Partnership
Waterjet manufacturers Jet Edge (St.
Dual-Pressure Valve Runs Multiple Waterjets
The remotely mounted, dual-pressure valve from Jet Edge enables operators to run multiple waterjet tables at various pressures simultaneously with a single pump. Operators can perform low-pressure piercing operations without waiting for the pump to raise or lower to the desired pressure.
Jet Edge Acquires Fellow Waterjet Builder
Waterjet manufacturer Jet Edge (St. Michael, Minnesota) has acquired Calypso Waterjet Systems (Dallas, Texas).
100-hp Waterjet Intensifier Pump
The new iP60-100S waterjet pump from Jet Edge is a single-intensifier version of the company’s existing 100-hp pump. According to the company, eliminating the second intensifier allows it to offer this model at a lower price.
Waterjet Manufacturer Marks 25-Year Milestone
Jet Edge (St. Michael, Minnesota), a manufacturer of industrial waterjet cutting and surface preparation systems, celebrates its 25th anniversary this year.
Large-Format Waterjet Cutting Machine
The Jet-Edge large-format mid-rail gantry waterjet system features a 21- × 13-ft. work envelope with an exposed tank that accommodates overhead loading. A single cutting head is standard and an optional second cutting head can be added for increased productivity.
CAD/CAM Nesting Software
Jet Edge offers SigmaNest Companion CAD/CAM nesting software on its precision waterjet cutting systems. Developed by SigmaTEK Systems, the software uses a wizard-based approach that allows waterjet operators with little or no CAD/CAM experience to design, edit and nest parts quickly with little training, the company says. Functions include DXF import, TrueShape nesting, automatic path generation and NC-code generation.
Mid-Rail Gantry Waterjet With Overhead Loading
The Jet-Edge mid-rail gantry waterjet system features an 8 ft. × 13 ft. work envelope with an exposed tank that accommodates overhead loading. Although the system comes standard with one abrasive jet cutting head, a second cutting head can be added to increase productivity. The mid-rail gantry is ballscrew driven f
Productivity Soars With Dual-Head Waterjet
When SKL Fabricators, Inc., decided to upgrade its waterjet system in 2004, the Malden, Massachusetts fabricator and machine shop selected an HR48 from Jet Edge, Inc. The high-rail gantry system is powered by a 50-horsepower 55-50C intensifier pump capable of pressurizing water to 55,000 pounds per square inch. It is controlled by the manufacturer's PC-based AquaVision interface featuring SigmaNest software.
Videos
-
Video: Splitter Waterjet Machining at Michael Waltrip Racing
A waterjet machine cuts multiple polycarbonate “splitters” used on the front facia of a Nascar race car.
