SHOWROOM

Kalamazoo Industries Inc.



Phone: 269-382-2050
Toll-Free: 800-592-2050
Fax: 269-382-0790

Please visit: Kalamazoo Industries Inc.

Mailing Address:
6856 East K Ave.
Kalamazoo, MI 49048 US



A Special Message from Kalamazoo Industries Inc.

Abrasive Metallurgical Saw Model K12-14MS

Welcome to Kalamazoo Industries

Welcome! Kalamazoo Industries, Inc. manufactures Abrasive saws, belt sanders, 5C fixtures and vibratory finishers here in Kalamazoo, Michigan since 1960. Most standard products can be modified to suit your specific needs. Special machines can also be made to your specifications. Let us know how we can help!


Product Categories of Kalamazoo Industries Inc.

  • Abrasive Cut-Off Machines
  • Chucks, Collet Type (for Workholding)
  • Dividing & Indexing Heads
  • Grinding Machines, Abrasive Belt
  • Grinding Machines, Disc, Single or Double
  • Indexers & Rotary Tables
  • Sawing Machines, Other
  • Vibratory Tumbling Machines

Trade Names

  • Kalamazoo Industries, Inc.

Deep Links

As seen in MMS

Back Stand Grinder Speeds Metal Removal
Kalamazoo Industries’ model BG14 back stand grinder is intended for foundry applications such as rapidly grinding gates and risers.

February 2014 Product Spotlight: Grinding
Click through this slideshow to see the grinding products featured in February's Modern Equipment Review Spotlight section.

Multi-Purpose Belt Grinder for Die Casting
Kalamazoo Industries’ model S272V multi-purpose belt grinder is intended for grinding, shaping, contouring and more in small or short-run die-casting facilities.

Enclosed Wet Cutting Saw for Metallurgical Laboratories
Kalamazoo Industries offers the K12-14MS enclosed wet cutting saw for metallurgical laboratory applications such as slicing through sections of metal samples to inspect internal properties.

Five-Station Fabrication Center Improves Productivity
The Kalamazoo Metal Muncher series MM is a complete five-station fabrication center in a single unit.

Collet Fixture Enables Quick Setup for Short Runs
Kalamazoo Industries’ 1CC 5C collet fixture for chucks enables quick setup of 5C collets.

Wet Benchtop Sander Designed for High-Quality Requirements
Kalamazoo Industries’ model S4SWB wet benchtop sander is designed for applications requiring a high-quality, compact wet sander.

Enclosed, Wet Benchtop Saw for Manual Operation
Kalamazoo Industries’ model K10WBT is an enclosed, wet-cutting benchtop abrasive saw designed for economical manual operation.

Enclosed Semi-Automatic Abrasive Saw
Kalamazoo Industries’ model K26E 26" semi-automatic abrasive saw is enclosed with a 6" outlet to contain the dust and abrasive particulate matter produced during cutting.

Enclosed Wet Benchtop Saw Eases Manual Operation
Kalamazoo Industries’ model K10WBT enclosed, wet-cutting benchtop abrasive saw is designed to offer economical manual operation.

30"Abrasive Saw for Large Sections
Kalamazoo Industries’ model K30PH 30" abrasive saw features an air/oil power down feed; a 25-hp, three-phase, 220/440-V motor with magnetic starter; and a 1 3/4" arbor with sealed ball bearings.

Gentle Vibratory Finisher
Kalamazoo Industries’ model KVF3 vibratory finisher is designed for deburring, polishing and other finishing operations that require gently vibrating rotating media.

Manual Metallurgical Saw
Kalamazoo Industries’ says its model K12-14MS manual metallurgical saw features an enclosed wet-cutting area with dual coolant nozzles to virtually eliminate the dispersion of abrasive particles into the workplace.

Mitre Saw Designed For Precise Dry Cutting
Kalamazoo Industries’ model KM14SC mitre saw uses a 14" carbide-tipped blade to produce clean cuts without burrs or heat generation. This enables precise, dry cutting of thin-wall mild steel and aluminum, as well as 0.

Vibratory Finisher Design Offers Quiet Operation
Kalamazoo Industries’ Model KVF3A vibratory finisher is designed for deburring, polishing and other finishing operations for applications requiring the gentle vibrating action of rotating media. The finisher has a 3.3-ft3 capacity steel tub with cast urethane lining, and a ¾-hp, single-phase 110 VAC motor for power

Disc Sander For Demanding Applications

Lock Down Head Saw