MariTool, Inc.

242 Beinoris Drive
Wood Dale, IL 60191 US

Connect

A Message from MariTool, Inc.

High Quality Tool Holders, Collets and Accessories

CAT 40 ER32 Collet Chuck Tool Holder * Collet Chuck accepts all ER32 collets * Works on all CAT 40 machines * All critical surfaces precision ground * Made from alloy steel hardened to 54 - 56rc * Balanced to G2.5 @ 20,000 rpms * Gage length is 76mm (3.0 inches) * Concentricity is less than .0001 at collet face * Internal stop screw and collet nut is included * Coolant thru capability * Rear thread for pull stud is 5/8?11 * MariTool Part# is CAT40-ER32-3.0

High Quality Tool Holders, Collets and Accessories

1/2 Double Eneded Variable Flute End Mill X .750 Flute Length * Variable Helix and Indexing allow high speed machining while greatly reducing harmonics and vibration. * For high speed machining ( HSM ) it is recommended you run this tool dry. * This tool has a Weldon flat on the shank. * This tool is double ended for drastic tool savings Total length: 4.0 Material: Solid Micrograin Carbide End style: Square Number of flutes: 4 Centercutting: Yes Double Ended: Yes Shank size: .500 with weldon flat Coating: TIALN Corner radius: .030 Flute length: .750 Cutting diameter: .500

High Quality Tool Holders, Collets and Accessories

ER 32 COLLET 18 PIECE SET This set includes 18 individual ER32 collets in 1mm increments. * Total runout less than .0003 on these precise collets. * Made from Alloy spring steel and fully hardened. * All critical surfaces are precision ground for accurate fit. * Full set covers all sizes from .076 to .787 (2mm - 20mm) * Comes in a wooden box

As Seen In Modern Machine Shop

Cutting Tool Coatings Improve Performance
MariTool offers a variety of cutting tools coated in diamond-like carbon (DLC) for increased hardness and in zirconium nitride (ZrN) for improved abrasion resistance.

Product Categories of MariTool, Inc.

Chamfering Tools
Drill Chucks
Drills
End Mills
Inserts, Indexable (Carbide, etc.) & Tool Inserts
Key Seaters
Key Seating Tools
Milling Cutters
Reamers
Retention Knobs
Taps
Toolholders

Back to showroom


High Quality Tool Holders, Collets and Accessories

1/2 Double Eneded Variable Flute End Mill X .750 Flute Length * Variable Helix and Indexing allow high speed machining while greatly reducing harmonics and vibration. * For high speed machining ( HSM ) it is recommended you run this tool dry. * This tool has a Weldon flat on the shank. * This tool is double ended for drastic tool savings Total length: 4.0 Material: Solid Micrograin Carbide End style: Square Number of flutes: 4 Centercutting: Yes Double Ended: Yes Shank size: .500 with weldon flat Coating: TIALN Corner radius: .030 Flute length: .750 Cutting diameter: .500

Back to showroom


High Quality Tool Holders, Collets and Accessories

ER 32 COLLET 18 PIECE SET This set includes 18 individual ER32 collets in 1mm increments. * Total runout less than .0003 on these precise collets. * Made from Alloy spring steel and fully hardened. * All critical surfaces are precision ground for accurate fit. * Full set covers all sizes from .076 to .787 (2mm - 20mm) * Comes in a wooden box

Back to showroom


High Quality Tool Holders, Collets and Accessories

CAT 40 ER32 Collet Chuck Tool Holder * Collet Chuck accepts all ER32 collets * Works on all CAT 40 machines * All critical surfaces precision ground * Made from alloy steel hardened to 54 - 56rc * Balanced to G2.5 @ 20,000 rpms * Gage length is 76mm (3.0 inches) * Concentricity is less than .0001 at collet face * Internal stop screw and collet nut is included * Coolant thru capability * Rear thread for pull stud is 5/8?11 * MariTool Part# is CAT40-ER32-3.0