Mikron Corp. Monroe

Phone: 203-261-3100
Fax: 203-268-4752

Please visit: Mikron Corp. Monroe

Mailing Address:
200 Main St. - Unit 2A
Monroe, CT 06468 US

Search Machine Specs on Techspex
Mikron Milling/Machining Centers

A Special Message from Mikron Corp. Monroe

Engineering Intelligence for Customer Productivity

Product Categories of Mikron Corp. Monroe

  • Cut to Length Machines
  • Horizontal Machining Centers, Five-Axis
  • Machining Flex Lines
  • Maintenance & Repair Services
  • Transfer Machines, Dial Index
  • Transfer Machines, In-Line
  • Transfer Machines, Rotary
  • Transfer Machines, Trunnion

Trade Names

  • CrazyDrill
  • CrazyDrill Alu
  • CrazyDrill Cool
  • CrazyDrill Crosspilot
  • CrazyDrill Pilot
  • CrazyDrill Steel
  • CrazyDrill Twicenter
  • CrazyMill Cool
  • G05
  • Mikron NAM
  • Mikron NRG-50
  • MiquDrill 200
  • MiquDrill 210
  • MiquDrill Centro

As seen in MMS

Machining Center Turns, Mills, Drills on 5 ½ Sides of Workpiece
The Mikron Multistep XT-200 machines challenging workpieces in a single clamping operation and with a chip-to-chip time of less than 1 sec.

Small Drill Designed for Stainless Steel Cutting
With bad thermal conductivity, high ductility and long chips, stainless steel cutting is a challenge even for machining specialists.

Managing the Micro-Milling Process with Tiny Cutters
The engineering of this line of small end mills brings out both the challenges and opportunities in milling hard-to-machine materials on a micro scale.

Deep Holes with a Carbide Microdrill That Flexes
These microdrills combine the advantages of HSS with those of solid carbide.

Carbide Micro Drill Offers Flexibility
CrazyDrill Flex from Mikron Tool combines the flexibility of an HSS drill with the increased tool life and precision of a solid carbide drill.

Drill Program For Small Diameter Ranges
Mikron Tool’s drill program for small diameter ranges includes the MiquMill Frontchamfer. Available in diameters as small as 1 mm, the mini chamfer mill is designed to machine hard-to-reach spots.

Dual-Feature Center Drill
The CrazyDrill Twicenter from Mikron Tool features two integrated coolant ducts and a double cutting point. The integrated ducts supply coolant directly to the drill’s cutting edge, so no additional external cooling is needed. Bringing the coolant to the cutting edge is a challenge for drilling—and consequently when centering—in difficult-to-access places.

Flexible Machining For Medium–Volume Production—Mikron, Booth 1025