SHOWROOM

Mitee-Bite Products LLC



Phone: 603-539-4538
Toll-Free: 800-543-3580
Fax: 603-539-2183

Please visit: Mitee-Bite Products LLC

Mailing Address:
340 Route 16B
PO Box 430
Center Ossipee, NH 03814 US



A Special Message from Mitee-Bite Products LLC

Innovative Clamps for Workholding Solutions

MITEE-BITE PRODUCTS INC. The Workholding Specialists

Mitee-Bite Products Inc., founded in 1986 is located in a rural setting in the lakes and Mountain region of New Hampshire. We are the innovator of compact, low profile edge clamps which improves production in CNC machining centers. Our original cam action clamp was designed to improve the production process in a contract machine shop. Since that time many types of clamps have been added. These products are readily accepted because of the benefits they offer. Mitee-Bite Products Inc., is known world wide for the quality of our products and for the service it provides our customers. Vist our website www.miteebite.com for downloadable Cad Files and a distributor near you or call 603-539-4538 or 800-543-3580.


Product Categories of Mitee-Bite Products LLC

  • Actuators, Hydraulic & Pneumatic
  • Arbors, Expandable Workholding
  • Chucks, Magnetic
  • Chucks, Vacuum
  • Clamps & Fixturing Devices
  • Collets for Workholding
  • Fixturing Systems
  • Mandrels
  • Pallet Changers - Manual
  • Vises & Vise Jaws
  • Workholding, Custom

Trade Names

  • ID Xpansion clamps
  • Kopal
  • Loc-Down System
  • Loc-Jaw System
  • Loc-Lite
  • Mitee-Bite
  • Multi-Power Vac
  • OK-Vise
  • Pitbull
  • Uni-Force
  • VacMagic

As seen in MMS

Mitee-Bite Expands Service Offerings
The company now provides more options for workholding solutions.

Mitee-Bite Expands Its Service Offerings
The company's service expansion turns to CAD layouts and designs.

Vise Jaws Enable Workholding Versatility
Mitee-Bite's VersaGrip vise jaw system clamps standard vise work as well as difficult applications that would normally require fixturing or machining soft jaws.

Vise Jaw System Holds Irregular Workpieces
The VersaGrip vise jaw system from Mitee-Bite is designed to offer the versatility of clamping standard vise work as well as workpieces that would normally require fixturing or machining soft jaws.

The “Headless Bolt” Fixturing Alternative
This fastener enables fast workpiece change-overs compared to conventional bolts and less cutter interference thanks to its compact design.

Headless Bolt Secures Aerospace Parts
Mitee-Bite’s Loc-Down system enables the quick attachment or removal of plates and workpieces from sub-plates.

Cramming for Competitiveness
Low-profile clamps contribute to the high-density fixturing this shop needs to make the most of an equipment configuration that is increasingly renowned for reducing setups and keeping the spindle turning.

Loc-Jaw System for Fourth and Fifth Axis Machining
The Loc-Jaw system for fourth and fifth axis machining is said to require no material preparation.

A Different Approach to Tool-Break Detection
A standard feature on the CNC of this shop's workhorse machine helps improve confidence in unattended runs.

Clamping System for Four-, Five-Axis Machining
The Loc-Jaw system from Mitee-Bite is designed for use in four- and five-axis machining.

Two Systems for Multi-Axis Machining
Mitee-Bite introduces two workholding solutions for fourth- and fifth-axis machining: the Loc-Jaw System and Loc-Down.

Manual Actuators for Gripping ID of Blind Holes
Mitee-Bite’s manual actuator is designed for the ID gripping of blind holes and various other applications.

Manual Actuators Grip the ID of Blind Holes
Mitee-Bite Products has introduced manual actuators designed to grip the ID of blind holes and many other applications.

“Lean” CMM Workholding Features Quick Part Change
Designed to compliment intelligent CMMs, Mitee-Bite’s “lean” line of workholding products are designed to increase productivity by enabling one-handed part swaps.

Vise Jaw System Grips Oddly Shaped Parts
Mitee-Bite’s VersaGrip can clamp standard vise work as well as difficult parts that would normally require fixturing or machining soft-jaws.

Vacuum Chuck for Workholding Flexibility
The VM100 is designed for grinding non-ferrous materials on a magnetic chuck.

Grind Nonferrous Materials On A Magnetic Chuck
Mitee-Bite’s VM100 vacuum system is primarily designed for grinding nonferrous materials on a magnetic chuck. The system, which can be used as a pallet changer, accepts a standard 14" × 12" vacuum pallet.

Workholding For Aggressive Machining Operations
Designed to increase the versatility of standard 4" and 6" vises, the TalonGrip bolt-on system is suited for performing aggressive machining operations while clamping on as little as 0. 060" of workpiece material. The system is said to be ideal for small lot sizes, difficult applications and prototype work.

Increased Versatility Fixturing
Designed to increase the versatility of standard 4" and 6" vises, TalonGrip is a simple bolt-on system that allows users to perform aggressive machining operations while clamping on as little as 0. 060". The system is suited for small lot sizes and difficult applications.

Small Clamps Make Big Clamping Power