-
MAXIEM Optimizes Customer Experience with New Website
-
7/16/2009
MAXIEM Optimizes Customer Experience with New Website
7/16/2009
Provided By
OMAX Corporation
NEWS RELEASE
INFORMATION:
Sandra McLain, Vice President of Marketing
OMAX Corporation
Phone: (800) 838-0343
Email: sandra.mclain@omax.com
MAXIEM Optimizes Customer Experience with New Website
Kent, Washington, July 14, 2009 ? MAXIEM, a division of OMAX, today announced the launch of its new website located at www.maxiemwaterjets.com. The site, which serves as a comprehensive resource for the recently debuted line of high performance, low-cost abrasive waterjets, will be updated regularly with new video content and product information.
The MAXIEM line is ideal for fabrication shops, metal service centers, trade schools, job shops, architectural, sign, stone and gasket shops. Manufactured entirely in the U.S., the abrasive waterjets integrate proven technologies in a cost-efficient package to provide users with an affordable, highly productive solution.
The first MAXIEM waterjet to be released is the MAXIEM 1530. Designed for the production of large parts or multiple parts from large stock, the machine productively cuts a wide variety of materials, including metal, plastic, glass, ceramics, stone and composites. The machine?s 50,000 psi pump is available in 20 and 30 horsepower options. All MAXIEM waterjets will feature Intelli-MAX® Basic, a control containing the core functionality of OMAX?s critically acclaimed software, as well as the patent pending X and Y-axis traction drive system designed to handle an abrasive environment.
About MAXIEM
MAXIEM, a division of OMAX, manufactures affordable, high performance abrasive waterjet solutions for shops that desire speed, flexibility and efficiency. Each MAXIEM waterjet is equipped with Intelli-MAX® Basic, easy-to-use software that brings the advantages of abrasive waterjet technology to a much more accessible level. For more information on MAXIEM products and accessories, contact Sandra McLain at 800.838.0343 or visit www.maxiemwaterjets.com.
###
Photo Caption: OMAX's MAXIEM line of waterjet machines integrates proven technologies in a cost-efficient package to provide users with an affordable, highly productive solution.
-
MAXIEM Abrasive Waterjet Line to Debut in June
-
6/25/2009
MAXIEM Abrasive Waterjet Line to Debut in June
6/25/2009
Provided By
OMAX Corporation
NEWS RELEASE
INFORMATION:
Sandra McLain, Vice President of Marketing
OMAX Corporation
Phone: (800) 838-0343
Email: sandra.mclain@omax.com
MAXIEM Abrasive Waterjet Line to Debut in June
New brand of high performance, low cost machines developed by OMAX®
Kent, Washington, June 16, 2009 ? OMAX has announced the introduction of MAXIEM, a new brand of waterjets debuting in June. Manufactured entirely in the US, this new line of machines integrates proven technologies in a cost-efficient package to provide users with an affordable, highly productive solution.
?Through years of marketing the OMAX line of JetMachining® Centers, we recognized the strong demand for a line of basic abrasive waterjet equipment,? commented Dr. John Cheung, CEO of OMAX. ?With the new MAXIEM line, we meet this demand, as well as the varying performance needs required by the international community. These varying needs and requirements coupled with the current economic situation make this a most opportune time to introduce this type of machine.?
Due to the differing specifications of MAXIEM machine, the line will not directly compete with OMAX products and is instead intended to broaden the market for abrasive waterjets. The MAXIEM line of machines is ideal for fabrication shops, metal service centers, trade schools, job shops, architectural, sign, stone and gasket shops.
?As waterjet technology has evolved, the precision and accuracy of OMAX machines has moved beyond the point of what some manufacturers require,? says Dr. John Olsen, co-founder and vice president of operations for OMAX. ?To meet the needs of that market segment, we have built off OMAX?s R&D to develop the MAXIEM brand, a highly productive, entry-level line of abrasive waterjets. With the hardships manufacturers are facing due to the economy, we felt it was our obligation to make the cost benefits of our waterjet technology available to as broad a base as possible.?
The first MAXIEM waterjet to be released is the 1530MX. Designed for the production of large parts or multiple parts from large stock, the machine productively cuts a wide variety of materials, including metal, plastic, glass, ceramics, stone and composites. The machine?s 50,000 psi pump is available in 20 and 30 horsepower options. All MAXIEM waterjets will feature Intelli-MAX® Basic, a control containing the core functionality of OMAX?s critically acclaimed software, as well as the patent-pending X and Y-axis Traction Drive System designed to handle an abrasive environment
For more information, please visit www.maxiemwaterjets.com.
About OMAX
Headquartered in Kent, Washington, OMAX Corporation is the leading manufacturer of precision abrasive waterjet systems. Each OMAX JetMachining system is powered by the company?s innovative control software, bringing affordable abrasivejet technology to an expanding and diverse group of industries. For more information on OMAX products and accessories, contact Sandra McLain at 800.838.0343 or visit www.omax.com.
-
OMAX® Rotary Axis Accessory Facilitates Complex Design Capabilities with Waterjet
-
6/11/2009
OMAX® Rotary Axis Accessory Facilitates Complex Design Capabilities with Waterjet
6/11/2009
Provided By
OMAX Corporation
NEWS RELEASE
INFORMATION: Sandra McLain,
OMAX Marketing
Phone: (800) 838-0343
Email: sandra.mclain@omax.com
FOR IMMEDIATE RELEASE
OMAX® Rotary Axis Accessory Facilitates Complex Design Capabilities with Waterjet
Kent, Washington, June 11, 2009 ? OMAX® Corporation's Rotary Axis is the latest offering in the company's line of industry-leading precision abrasivejet machining products. When equipped with a Rotary Axis, the OMAX JetMachining® Center cuts XYZ paths to create complex 3D parts with incremental index rotations from pre-existing CAD drawings or DXF files. The accessory is available for installation on all OMAX JetMachining Centers and opens more design capabilities.
The Rotary Axis is ideal for cutting pipe, circular or square stock materials and is designed with multiple mounting features on the output drive shaft. The accessory's drive head also allows users to attach customized holding fixtures. The versatile attachment design allows users to position the head in various locations in the tank. The horizontal Rotary Axis provides cutting adaptability in the Z travel direction and adds several height options for the part's design.
Fully submergible and powered by common table controls, the rotary head does not require an additional power supply. The accessory also contains a built-in water drip sensor with warning lights and automatic shutdown. Additionally, the Rotary Axis is equipped with external grease fittings for easy maintenance.
The vertical waterjet allows for a safer, cleaner and quieter process. Waterjet technology also eliminates heat-affected zones when cutting metal materials. An OMAX JetMachining Center can reduce the cutting time to produce parts when compared to lengthy CNC milling processes.
OMAX believes in manufacturing the best machines and accessories possible with the best software available, and works to continually develop cutting-edge technology and innovative software for its customers. As a result, each OMAX product comes with the OMAX Technology Guarantee, which provides software upgrades for all existing customers at no additional charge.
About OMAX
Headquartered in Kent, Washington, OMAX ® Corporation is the leading manufacturer of precision abrasive waterjet systems. Each OMAX JetMachining® system is powered by the company?s innovative control software, bringing affordable abrasivejet technology to an expanding and diverse group of industries. For more information on OMAX products and accessories, contact Sandra McLain at 800.838.0343 or visit www.omax.com.
###
Photo Caption: When using a Rotary Axis accessory, the OMAX® JetMachining® Center incrementally cuts complex XYZ paths, such as the slots on this aluminum pipe.
-
OMAX® Traction Drive Delivers High Precision Accuracy and Improved Flexibility
-
6/11/2009
OMAX® Traction Drive Delivers High Precision Accuracy and Improved Flexibility
6/11/2009
Provided By
OMAX Corporation
NEWS RELEASE
INFORMATION: Sandra McLain,
OMAX Marketing
Phone: (800) 838-0343
Email: sandra.mclain@omax.com
FOR IMMEDIATE RELEASE
OMAX® Traction Drive Delivers High Precision Accuracy and Improved Flexibility
Kent, Washington, June 11, 2009 ? OMAX® Corporation recently developed the Intelli-TRAX®, a traction drive that is closed loop to ensure high precision accuracy on larger models of JetMachining® Centers.
The mechanical force to produce motion is obtained from a friction wheel pressed tightly against a rail and is easily controlled. This force is set to be sufficient in providing the required motion while being low enough to prevent injury to an operator. The drive uses a linear encoder positioning system with a sensor to read position information from a precision linear tape scale attached to the beam assembly. The sensor has a resolution of 1 µm. OMAX's decision to use precision linear tape scales instead of mechanical components allows users to achieve superior accuracy and greater safety.
The use of traction drive technology enables higher traverse speeds, which can greatly reduce the throughput times when machining multiple and nested parts. The drive also provides the flexibility to extend the X-axis work envelope on even our larger machine tables.
Intelli-TRAX is fully enclosed inside coated steel covers and tracks along a hardened, precision-ground stainless steel shaft, making it well suited for harsh environments. With no components in the system requiring lubrication, the traction drive system needs little maintenance.
OMAX is committed to developing cutting-edge technology and innovative software to ensure that each customer enjoys the benefits of the industry's best abrasive waterjet machines and accessories. As a result, each OMAX product comes with the OMAX Technology Guarantee, which provides software upgrades for all existing customers at no additional charge.
About OMAX
Headquartered in Kent, Washington, OMAX Corporation is the leading manufacturer of precision abrasive waterjet systems. Each OMAX JetMachining system is powered by the company?s innovative control software, bringing affordable abrasivejet technology to an expanding and diverse group of industries. For more information on OMAX products and accessories, contact Sandra McLain at 800.838.0343 or visit www.omax.com.
###
Photo Caption: OMAX® Corporation's Intelli-TRAX® X-axis traction drive ensures high precision accuracy on larger models of JetMachining® Centers.
-
OMAX Domestic Trade Shows, Seminars and Open Houses
-
5/27/2009
OMAX Domestic Trade Shows, Seminars and Open Houses
5/27/2009
Provided By
OMAX Corporation
2009 Trade Show Schedule Show Dates Shows Location Booth/Distributor Equip.
June 16-18 WMTS Edmonton, Canada 511 5555
More shows to be posted SOON!. For further information contact omax@omax.com
http://www.omax.com/tradeshows.php
-
OMAX Announces Settlement in Patent Litigation
-
5/27/2009
OMAX Announces Settlement in Patent Litigation
5/27/2009
Provided By
OMAX Corporation
NEWS RELEASE
INFORMATION: Sandra McLain,
OMAX Marketing
Phone: (800) 838-0343
Email: sandra.mclain@omax.com
FOR IMMEDIATE RELEASE
Announcement accompanied by abandonment of proposed merger with Flow Corporation
Kent, Washington, May 27, 2009 ? OMAX has announced the settlement of the outstanding patent litigation with Flow Corporation, along with the cessation of merger negotiations with the company.
?Due to the risks and difficulties of obtaining financing inherent in today?s capital markets, Flow elected to abandon the proposed merger between our companies,? says Dr. John Cheung, CEO of OMAX. ?While we still believe the merger could have provided significant benefits for both companies, OMAX was unwilling to further modify the terms of the merger agreement. OMAX is emerging from this process with a very strong financial position.?
In consideration for Flow?s termination of the merger and the patent settlement, OMAX will receive $25 million in cash and $10 million in notes maturing in four years. A cross-licensing agreement has been reached for the patents involved in the litigation.
?No commercialized technology was exchanged between OMAX and Flow, so we will retain complete ownership of the innovations that have made our company an industry leader,? says Dr. Cheung. ?The technologies exclusively available in OMAX waterjets include Intelli-MAX® control software, direct drive pump technology and Intelli-TRAX?, the world?s first drive system designed exclusively for waterjet machining centers.?
OMAX has also announced the establishment of MAXIEM?, a new division and brand within the company. With full technical details forthcoming, MAXIEM machines will debut during the summer of 2009 and offer the unparalleled flexibility and productivity of waterjet machining at a highly affordable price point.
?Having penetrated markets in over 40 countries, we have identified a significant global need for a basic line of waterjet machines,? says Dr. John Olsen, co-founder and Vice President of Operations at OMAX. ?Through extensive R&D, we developed the MAXIEM line of machines to provide proven technologies in a highly productive, cost-efficient package.?
###
About OMAX
Headquartered in Kent, Washington, OMAX Corporation is the leading manufacturer of precision abrasive waterjet systems. Each OMAX JetMachining® system is powered by the company?s innovative control software, bringing affordable abrasivejet technology to an expanding and diverse group of industries. For more information on OMAX products and accessories, contact Sandra McLain at 800.838.0343 or visit www.omax.com.
-
2009 Section 179 Tax Deduction
-
4/2/2009
2009 Section 179 Tax Deduction
4/2/2009
Provided By
OMAX Corporation
Dear Business Owner,
Are you still considering an OMAX® JetMachining® Center for your shop? You have new options to purchase one in 2009 with help from Uncle Sam!
Did you know that businesses purchasing up to $800,000 of qualifying equipment in 2009 may immediately expense up to $250,000 under Section 179 of the IRS Tax Code? Equipment acquired with Equipment Finance Agreements or Tax (True) Leases can be eligible for this benefit. Tangible business expenses can be expensed during the year they are purchased, rather than depreciating them across a period of several years.
These tax savings could be used to make some of your monthly payments for an OMAX, thereby reducing the overall cost of equipment ownership!
The American Recovery and Reinvestment Act of 2009 provides additional tax savings! Under this plan, businesses are allowed to immediately write-off 50% of the depreciable cost of new equipment purchases as long as the equipment is both purchased and placed into service in 2009. There are no limitations on the amount of equipment taxpayers can purchase and write-off under this provision. When combined with the Section 179 deduction, your savings can be dramatic!
We have seen our customers benefit from cost savings after owning an OMAX JetMachining Center. We don?t know of any other machine tool that can generate cash flow like OMAX products. Please call us or your tax advisor to learn more about Section 179 and the American Recovery and Reinvestment Act of 2009.
When the economic climate gives you lemons ― make lemonade! If you would like more information about this huge savings opportunity, please visit our online financial support page at www.omax.com/financial.php or call 1-800-838-0343.
Sincerely,
Angie Tucture
Inside Sales
OMAX Corporation
Direct Line/Fax: 330 677-2207
1-800-838-0343 Ext: 243
OMAX Live Sales Support
Email: angela.tucture@omax.com
Website: www.omax.com