Rohm Products of America, Inc.

Phone: 770-963-8440
Toll-Free: 800-445-7646
Fax: 770-963-8407

Please visit: Rohm Products of America, Inc.

Mailing Address:
5155 Sugarloaf Pkwy.
Suite K
Lawrenceville, GA 30043 US

A Special Message from Rohm Products of America, Inc.

Röhm - the leader in Workholding since 100 years

Röhm the leader in workholding since 100 years
Röhm the leader in workholding since 100 years

Since 100 years Röhm has been a leader in the Workholding industry in the standard and special designed products. With our established North American Headquarter in Lawrenceville, GA we can offer our customers advanced engineering and outstanding technical solutions, professional customer service and technical support and service through our service and repair facility and field service engineers. We will gain your trust due to solutions, quality, reliability and customer service before and after the sale.

Special designed self centering / compansating chuck KFD size 1600/6
Special designed self centering / compansating chuck KFD size 1600/6

Large bearing housings are tough to clamp. This hydraulic operated special chuck size 1600/6 was designed to hold rings from 15" to 60" with swiveling top jaws. The chuck works in compensating mode for OP. 1 to clamp un machined parts and hydraulically changes to self centering mode to clamp machined round diameters. The top tooling is designed to provide up to 24 clamping points equally spread around the diameter of the part to prevent distortion

Rohm Face Driver with friction driving disc to drive hard shafts between centers
Rohm Face Driver with friction driving disc to drive hard shafts between centers

Rohm power or manual operated Face Drivers with quick change driving discs and spring loaded or fixed centers have improved manufacturing of shafts since many years. Now we have a solution to drive hardened shafts which are faced and centered for hard turning operation with out a deep expense for Workholding. Friction driving plates on top of quick change driving discs are inexpensive and fast to change for different turning diameters. Shafts can be machined over the full length in one set up.

Product Categories of Rohm Products of America, Inc.

  • Actuators, Hydraulic & Pneumatic
  • Centers, Live & Other
  • Chuck Jaws & Collets
  • Chucks, Collet Type (for Workholding)
  • Chucks, Index
  • Chucks, Jaw Type
  • Chucks, Self-Contained
  • Chucks, Special
  • Clamps & Fixturing Devices
  • Drill Chucks
  • Fixturing Systems
  • Mandrels
  • Milling Heads/Attachments
  • Steady Rests
  • Tool Holders & Adapters
  • Tooling Systems, Modular and/or Quick-Change
  • Vises & Vise Jaws
  • Workholding, Custom

As seen in MMS

Chucks Enable Efficient Machining of Pipes
Designed specifically for the oil and gas industry, Röhm Products of America’s LVE chuck system enables manufacturers to quickly and efficiently process long, large pipes as well as associated pipe couplings and connectors.

Röhm and ATS Systems Form Partnership
The companies are launching the alliance with a nationwide tour of their mobile technology center.

Houstex 2015 Preview Slideshow
Click through the slideshow to see a selection of technologies to be displayed at Houstex in advance of the February 24-26 trade show.

Röhm Opens Subsidiary in Mexico
The new location will support the company's growing market presence and will focus on helping local customers attain maximum returns on purchases.

Standardized Clamping and Gripping Products are Economical
Röhm Products of America exhibits a range of clamping and gripping products, including its new Orange Line, which covers drill chucks and live centers as well as lathe chucks and machine vises.

Chucking System Simplifies Workholding Changes
The Duro-NCSE Flex power chuck from Röhm Products of America provides a quick, simple way to change out jaws and clamping tools.

Electrical Clamping System Reduces Energy Usage
The EVS 50 electrical clamping system, part of Röhm’s e-Quipment line of clamping and gripping systems, activates power chucks on turning and grinding machines without hydraulics or pneumatics.

Hybrid Chucks Reduce Downtime
Rohm’s MZMF hybrid chuck is a combination of a three-jaw manual chuck and a round, magnetic support plate. By combining the two technologies, workpieces of various sizes can be evenly and securely clamped and machined from three sides, the company says. Clamping, before turning or grinding operations, is carried out in seconds, minimizing machine downtime.

Quick-Change Workholding System
The company offers the RMS workholding quick-change system for manual- and power-operated clamping devices. According to the company, the system is designed to allow the fast and accurate change from, for example, power chuck to power operated (via drawbar) mandrels to manual chucks or face drivers. The company supplies a short taper mount receiver, which is permanently installed to the machine spindle.

Quick Change Workholding For Hard-To-Hold Parts
This pwer chuck features direct transmission of the piston force to the jaws in the area of the jaw guides. The axial actuating force is transmitted to the jaws without major friction loss.