Royal Products

200 Oser Ave.
Hauppauge, NY 11788 US

Connect

A Message from Royal Products

Supercharge Your Machine Tools

Royal Rota-RackThe Royal Rota-Rack is a lean, cost-effective device that enables any bar-fed CNC lathe to run unattended for extended periods of time.

Royal Filtermist

The Royal Filtermist is a low-cost, highly efficient mist and smoke collector designed specifically for the metalworking industry.

Royal Low-Profile CNC Collet Chucks

Royal Low-Profile CNC collet chucks are available in both pullback and Accu-Length versions to cover a wide range of medical, aerospace, automotive, and general turning applications.

As Seen In Modern Machine Shop

Royal Products expanding mandrel cross-section

Inner-Diameter Part Clamping Offers Lathes Complete Outer-Diameter Access
Royal Products' CNC expanding mandrels provide access to the entire outer diameter of the workpiece.

Collet Chucks Accommodate Varied Workpiece Diameters
Quick-Grip CNC collet chucks from Royal Products are said to boost productivity by reducing collet change-over time to 10 sec.

Royal Products Hires Regional Manager
Matt Block will support the company’s distribution network in Illinois, Iowa, Nebraska, Northeastern Missouri and Wisconsin.

Keyless Drill Chucks Ensure Precise Hole Sizing
Albrecht’s precision drill chucks, available from Royal Products, are designed to ensure precise hole sizing and extend drill life.

Manual Collet Fixture Enables Vertical, Horizontal Mounting
Royal Products’ Quick-Grip (QG) manual collet fixtures are suitable for use with the company’s QG-42, 65 and 80 series collets.

Royal Products Hires Regional Manager
The company is pleased to welcome a new member on the team, and is confident he will provide a solid foundation for a successful future.

From Aggravation to Lights-Out Production
Automated machining has transformed this South Carolina shop. However, achieving unattended production involved far more than just shutting off the lights.

rota-rack

Work Handling’s Final Step
Machine tool accessories supplier Royal Products manufactures centers, but the company was damaging some of these parts because of its approach to work handling. Learn how the company changed it work handling approach, and was able to run lathes unattended.

Portable Oil Mist Removal with Cyclonic Technology
Filtermist Ultra from Royal Products is a portable solution for oil mist and smoke that combines the company’s existing Filtermist product with cyclonic technology to remove additional pollutants.

Five-axis Integrex i-200S from Mazak Corp.

Making the Move to Multitasking
Implementing a done-in-one approach to production has to be managed carefully. This shop seems to have made all the right moves in what has turned out to be a truly transformative experience.

Albrecht Überchuck

CNC Milling Chucks Ease Tool Changes, Reduce Downtime
The Überchuck precision CNC milling chuck from Albrecht uses a two-stage clamping mechanism to increase gripping torque, rigidity and damping.

 Royal Products Filtermist FX-Series mist collector

Mist Collector Cuts Accident, Fire Risks
Royal Products' Filtermist FX series is designed to collect mist and smoke generated by virtually all types of metalworking machinery.

Jr. Parts Collector
Users of Swiss-type lathes might find this part-collecting device helpful for lights-out machining.

Sealed ER Collets
Royal’s Ultra-Precision ER collets are available in 31 inch sizes ranging from 1/16" to 1" in diameter and 16 metric sizes ranging from 1 to 26 mm in diameter.

CNC Collet Chucks
Quick-Grip CNC collet chucks from Royal Products come with a special installation tool that compresses the rear end of the collet for fast, easy collet changes.

CNC Bar Pullers For Low-Cost Automation
Royal Products says its range of CNC bar pullers can automate virtually any CNC lathe or turning center freeing operators to handle other tasks.

Rotary table for parts collection

A New Spin On Parts Collection
How do you manage the parts your bar-fed lathe creates overnight? An indexing collection device can serve as an effective means to safely collect precision components.

1,700 inch-pounds of torque

Get A (Tight) Grip
High toolholder gripping torque reduces the likelihood that a tool will slip within a toolholder during a cutting operation. A mechanical toolholder design provides a very high gripping torque via a worm gear that compresses a shallow-taper collet tightly around a tool shank.

Bar Puller Basics
Bar pullers are cost-effective alternatives to enable automated turning on CNC lathes. This article explains how they work and how shops can benefit from using them.

Product Categories of Royal Products

Actuators, Hydraulic & Pneumatic
Arbors (for Cutters)
Arbors, Expandable Workholding
Bar Feed Mechanisms
Centers, Live & Other
Chamfering Tools
Chuck Jaws & Collets
Chucks, Collet Type (for Workholding)
Chucks, Jaw Type
Chucks, Precision
Chucks, Self-Contained
Chucks, Special
Clamps & Fixturing Devices
CNC Attachments
Collets for Workholding
Collets, Solid and Master
Conveyors & Other Part Handling Automation
Counterbores/Countersinks
Cut-Off Tools/Attachments
Deburring Equipment
Deburring Machines
Deburring Tools (Machine Tool Spindle-Mounted)
Drill Chucks
Drilling Attachments
Dust Collectors & Air Filtration
Environmental & Pollution Control Equipment
Fixturing Systems
Gantry Loaders
Grinding Attachments & Accessories
Lighting Equipment
Machinery Mountings, Levels, Anchors, Dampers
Mandrels
Milling Heads/Attachments
Pick-off Attachments
Pumps, Coolant
Robot Tooling/Grippers
Toolholders
Tooling Systems, Modular and/or Quick-Change
Turning Attachments
Vises & Vise Jaws
Workholding, Custom

Trade Names

Albrecht
APC
Easychange
Filtermist
Grippex
Noga
PMS
Rota-Rack
Royal
Royal Filtermist
Royal Products
Spindle Type
Super Quad
Tuff-Pro
Value-Turn
Versa Turn
Zip Burr

Back to showroom

Supercharge Your Machine Tools

Royal Rota-Rack

The Royal Rota-Rack is a lean, cost-effective device that enables any bar-fed CNC lathe to run unattended for extended periods of time. The Rota-Rack works by indexing each time a part exits the machine, safely collecting and protecting finished workpieces. Benefits of the Royal Rota-Rack include: - The ability to run a second or third shift with existing equipment and no additional employees - First-shift employees are freed up to handle more productive tasks - Reduced risk of part damage - Shorter lead times - Lower manufacturing costs - Higher profits See the Royal Rota-Rack in operation at IMTS in booth F-2124

Back to showroom

Royal Filtermist

The Royal Filtermist is a low-cost, highly efficient mist and smoke collector designed specifically for the metalworking industry. There are currently over 125,000 Filtermist units operating in over 40 countries worldwide, making Filtermist the world’s leading mist eliminator. The Royal Filtermist is available in four sizes, ranging from 275 – 1200 cfm, and can be mounted in a variety of configurations to suit virtually all machine tool requirements.

Back to showroom

Royal Low-Profile CNC Collet Chucks

Royal Low-Profile CNC collet chucks are available in both pullback and Accu-Length versions to cover a wide range of medical, aerospace, automotive, and general turning applications. All Royal Low-Profile CNC Collet Chucks are precision manufactured in USA and include a custom-machined drawtube connector for hassle-free installation. Our huge chuck inventory to ensure that all orders ship within 24 hours.