Results: 1 to 10 of 44

Sort By: Posted Date | Source

Type: AllArticleVideoinMotion Transcript
Article with Video

MFG.com: Marketplace For Manufacturing
4/6/2009 Modern Machine Shop

(Sponsored content) An MMS InMotion presentation along with a collection of user profiles all describe how machine shops are winning new business using this online resource.

Faster Micro-Finishes for Micromachining
4/3/2009 Modern Machine Shop

 Smooth finish comes from balanced cutting parameters, as this video explains.

Linear Motor Micromachining Center
3/18/2009 Modern Machine Shop

Video shows the smooth, quiet, rapid motion characteristic of effective micromilling.

Five-Axis Milling On Linear-Motor Machining Center
2/4/2009 Modern Machine Shop

Linear motors take the place of ballscrews on this machine performing high speed cutting of aluminum at a job shop near Atlanta.

What Is The Right Way To Become An Aerospace Shop?
1/26/2009 Modern Machine Shop

This Atlanta shop succeeded at becoming an aircraft-industry parts supplier. The lessons of its success have a lot to do with commitment and enthusiasm.

Intelligent Tools from Dauphin Precision Case Study
12/30/2008 Modern Machine Shop

 Case Study presented by Walter Grinders, Inc. of Brubaker Tool.

Why Measure Cutting Tools: Toyota’s Answer - Product quality and process reliability Case Study
12/30/2008 Modern Machine Shop

 Case study submitted by Walter Grinders.

Delicate Features
9/19/2008 Modern Machine Shop

Electrodes with thin walls , ribs or other delicate features can be machined in one piece with HSM, because the light cuts put so little pressure between the cutter and the workpiece. This can do away with the need to use separate electrodes for these features. Reducing the EDM process to just one electrode redu

Why High Speed Machining?
8/22/2008 Modern Machine Shop

This video demonstrates high speed machining. High Speed Machining offers a way to mill complex structures in aluminum that were never practical before. Makers of structural components can achieve thinner walls for reduced weight and machine monolithic structures that save on assembly. Makers of fuel syste

Thin Wall Machining
8/22/2008 Modern Machine Shop

This video demonstrates thin wall machining. Taking the weight out of some parts by machining them with thinner walls is not a new idea. But the thinnest walls require light cuts that may be too time-consuming at lower speeds. HSM changes the equation. By combining light cuts with high feed rates, HSM permits thin

« Prev | Page 1 of 5 | Next »

RSS