Five-Axis Machining Centers

Exploring the: Five-Axis Machining Centers Zone

26 Results for: Case Study

Sort by:
Published: 5/14/2012

Postprocessing System Eases Technology Adoption
At this aerospace manufacturer, software from ICAM minimizes time spent reworking out-of-the-box postprocessors for new machines and improves confidence in part programs.

Published: 9/14/2011

Cell Controller Boosts Production Flexibility
By serving as the “brains” of a cell consisting of two machining centers and a work delivery system, cell control software from Erowa helps this manufacturer run lights-out 24/7 and achieve 90-percent spindle utilization.

Published: 6/13/2011

Software Streamlines Model-to-Mold Production
At Marland Mold, CimatronE CAM software’s modeling tools, postprocessors and other features streamline manufacturing operations from initial design to finished part.

Published: 4/18/2011

Five-Axis Machine Blends Power, Small Work Zone
A manufacturer of blisks and impellers needed to quickly find a new five-axis machining center, or risk losing a lucrative job. Two new VMCs fit the shop’s requirements and provided unexpected benefits. (Includes video.)

Published: 11/30/2010

Probe Has Right Touch for Five-Axis Aerospace Parts
On-machine measurement is critical at this aerospace manufacturer, which needs to ensure that features of already high-value parts are within specification before performing additional operations. With the RMP600 strain-gage probe from Renishaw, the...

Published: 11/10/2010

CAM Features Facilitate Five-Axis “Hog-Outs”
A point of pride for this shop is its ability to take on projects others wouldn’t touch. Recently, capabilities within Mastercam CAM software enabled the company to overcome challenges with a difficult aerospace component and, more significantly, to...

Published: 12/17/2009

Shop Enjoys Five-Axis Benefits Without The Cost
Integrating Lyndex-Nikken rotary tables into three-axis Mori Seiki VMCs provided this shop with five-axis capability at a fraction of the cost of a new five-axis machine.

Published: 10/15/2002

Manufacturer Slices Cycle Time 80 Percent
Most of this company's work is machined to tight tolerances and super-high finishes. It builds, assembles, tests and then ships a complete product. The many multi-faceted parts being machined typically required several setups on different machines, ...

Published: 7/15/2002

Software And Five-Axis Machining Center Provide Speed And Efficiency
Mold maker A.F. Gaskin (Buckinghamshire, United Kingdom) has customers who operate in fiercely competitive international markets, including Formula 1, and measure performance on the ability to deliver quality products in the shortest possible time.

Published: 1/15/2002

Manufacturer Halves Cycle Times With Machining Center
The complex shapes of the iron castings that make up the housings for this company's flow meters require machining on multiple faces. The castings undergo various types of machining operations, from drilling to helical thread milling.