CAD, CAM and Related Software
Exploring the: CAD, CAM and Related Software Zone
7 Results for: VideosSort by:
Video: Five-Axis Machining at Padgett Machine
A job shop owner talks about five-axis machining and feature-based programming.
Video: Manual Jog Mode within CAM
This CAM feature allows tool paths to be defined through a process that resembles jogging the machine manually.
Video: Milling with Full Flute Length
A shop captured this footage of the way a software feature permits deep cutting in steel.
Video: 3+2 Mold Machining at Eifel
A maker of injection molds for high-appearance-quality parts describes the machine tool, software and strategy this shop uses to apply 3+2 machining.
Hard Milling Isn’t Just High Speed Machining
Milling complex forms in hardened tool steel involves more than just fast, light cuts, says this maker of medical-related injection molds. Here are some of the ingredients of an effective hard milling process.
Video: Milling Inconel 718 Efficiently Without a Heavy Machine
This video of machining Inconel at a fast metal removal rate shows the effect of constant-engagement-angle milling.
Video: Milling Titanium 6-4 Efficiently Without a Heavy Machine
This video of machining titanium at a fast metal removal rate shows the effect of constant-engagement-angle milling.
CGS North America
• Mill/Turn and Multi-Task Machining
• Solid Modeling & High Speed Machining
CAM. 70% Time
Savings and More.