CAD, CAM and Related Software

Exploring the: CAD, CAM and Related Software Zone

50 Results for: Blog

Sort by:
Published: 12/11/2014

United Technologies Optimization Tool Added to Vericut
The new feed rate optimization tool is based on machining trials within UTC. The commitment of an established software company will help this OEM bring cost-saving technology to its suppliers.

Published: 11/27/2014

3D Systems to Acquire CAD/CAM Company Cimatron
Additive manufacturing technology supplier acquires CNC machining software company in a move focused on “the entire value proposition for manufacturing.”

Published: 7/25/2014

Useful Advice for CAM Software Users
In a new whitepaper, Mastercam calls useful advice for CAM software users “CAM Initiatives.” These initiatives are practical projects and procedural policies designed to help a machining company make more effective use of its CAD/CAM resources. Alth...

Published: 7/21/2014

Hexagon Acquires Vero Software
Hexagon AB, a global provider of design, measurement and visualization technologies, has announced the acquisition of Vero Software, a UK-based CAM software supplier.

Published: 6/9/2014

Retired Engineer Turns Machinist
The industrial benchtop CNC mill that Dan Rosenthal installed in his garage is no toy.

Published: 4/18/2014

Video: Keeping 3 + 2 Machining in the Clear
When using a five-axis machining center for 3 + 2 (positional) machining, the programmed tool path must be checked carefully to avoid collisions and optimize results. This video shows how Delcam PowerMill’s new Dynamic Machining Control improves thi...

Published: 4/17/2014

Hands-On Experience Helps Autodesk Innovate
During a recent trip to San Francisco, Calif., Senior Editor Chris Felix from sister publication Production Machining got a chance to visit Autodesk’s new Pier 9 facility. There, he learned about the commercial availability of Inventor HSM, an integ...

Published: 3/19/2014

Video: Optimizing Rapid Moves on a Five-Axis Machine
How do you optimize rapid positioning tool paths for five-axis operations? This write-up and video explains one approach.

Published: 3/13/2014

New Users Are Adopting Simulation Software
Even though the market for NC simulation software is mature, that doesn’t mean that new users cannot adopt it. In fact, one CGTech representative lists four reasons why shops that had never considered simulation software before are now opting for it...

Published: 2/20/2014

Laying Composites Fiber—Digitally
The most recent release of Spring Technologies’ NCSIMUL software can simulate the laying of fiber ribbon with NC machines.

SmartCAM features New Mill/Turn Sub-Spindle and B-axis Support, Morph Pattern Roughing.
• 2-5 Axis Milling
• Mill/Turn and Multi-Task Machining
• Solid Modeling & High Speed Machining
HSMXpress is full
featured 2 1/2-axis
CAM for SolidWorks.
Best of all, HSMXpress
is absolutely FREE!
iMachining - the
Revolution in
CAM. 70% Time
Savings and More.
Greatly Extended
Tool Life!