CAD, CAM and Related Software

Exploring the: CAD, CAM and Related Software Zone

121 Results for: Case Study

Sort by:
Published: 6/11/2013

Consolidating CAM Software Cuts Programming Time
At Trillium Machine Inc., there’s no room for thinking within the comfy confines of “the box,” working in the “comfort zone,” or refusing to try the untried. 

Published: 5/17/2013

A Big Move to Small-Parts Manufacturing
By using GibbsCAM software, Progressive Tool was able to change from large- to small-part manufacturing and produce more accurate parts with tighter tolerances.

Published: 4/19/2013

CNC Programming Software Maximizes Five-Axis Capability
By incorporating new CNC programming software to make full use of its new five-axis machining capabilities, Bob Lewis Machine Co. has reduced setups and programming time.

Published: 4/1/2013

Five-Axis CAD/CAM Lends a Hand to Prosthetics Manufacturing
By using a five-axis machine and a complementary five-axis release of Visi 20 CAD/CAM software from Vero, one manufacturer reduced setups and established more cost-effective production runs for complex prosthetic components.

Published: 1/16/2013

Software Speeds Prototype Production
Using Delcam’s PowerMill and PowerShape software enabled a prototype manufacturer to turn CAD data into a validation part in less than 24 hours.

Published: 1/16/2013

Native CAD Files Improve Pump Manufacturer’s Productivity
Implementing an integrated CAM package helped a pump manufacturer improve fixture design, offer single setup manufacturing processes and better communications and submissions to third-party vendors.

Published: 11/26/2012

Hassle-Free Posts Boost Programming Confidence
For this manufacturer of complex one-offs, TruePath software from CAMplete solutions has eliminated the need to fine-tune postprocessors and ensures programs and simulations accurately reflect what actually happens on the shop floor.

Published: 10/19/2012

VBA Macros Ease CAM Program Creation
Taking advantage of the open architecture of Esprit CAM software to write Visual Basic for Applications (VBA) macros simplifies CNC programming at this manufacturer of automotive presses.

Published: 9/17/2012

Exceeding Expectations with Multitask Machining
Implementing a multitasking machine with new CAM software enabled setup and production time reductions for the shop. One part even went from a setup time of 6 hours to 5 minutes.

Published: 8/13/2012

Shop Thrives on Evolving CAM Capabilities
High speed, turn-mill and “hybrid” tool paths that combine functionality are among the Mastercam CAM software features that help keep this shop competitive.

• 2-5 Axis Milling
• Mill/Turn and Multi-Task Machining
• Solid Modeling & High Speed Machining
iMachining - the
Revolution in
CAM. 70% Time
Savings and More.
Greatly Extended
Tool Life!
HSMXpress is full
featured 2 1/2-axis
CAM for SolidWorks.
Best of all, HSMXpress
is absolutely FREE!
SmartCAM features New Mill/Turn Sub-Spindle and B-axis Support, Morph Pattern Roughing.