Tooling & Workholding

Exploring the: Cutting Tools Zone
Article


Sort by:

« Prev | | Next »


Additive Manufacturing Makes Subtractive Cutting Tools

Mapal reaps the benefits of additive and subtractive manufacturing with its QTD drills.


Artistry with Skive Tools

Oliver Wendell Holmes said, “All limitations are self-imposed.” This statement often holds true as machinists apply their creativity in skiving applications.


Re-Turning Adds Life to Train Wheels

Tech Brief


The Cutter Affects Capacity

New machine tools allowed CTG to cut cycle time by 75 percent, but that wasn’t enough. Finding the right tool and process cut that cycle time further, giving the oil-industry manufacturer the capacity needed to support an important new product.


Tips on Breaking Chips and Controlling Burrs when Machining Automotive Transmission Components

Chip control is the bane of every shop’s existence and knowing how to consistently break chips and control burrs in ductile steels like SAE 1018, 1020, and 8620 is the holy grail of the tooling industry. When a shop experiences chip control issues, ...


A Formula for Cutting Tool Success

The hardness and toughness of a tool are generally counteractive forces, and finding the right mix can be a challenge. Wouldn’t it be nice to have both?


People are Part of the Process for Machining Inconel

A Tacoma shop describes its winning strategy for efficient machining of Inconel. That strategy includes careful choices of cutting tools and cutting parameters. It also includes a healthy breakfast.


Micromachining Evolution

Challenge Machine continues to add high-speed equipment for the increasing amount of micromachining work it is performing. Here are some lessons it has learned along the way, using tools as small as 0.001 inch in diameter.


ISO 13399—A Key Step Toward Data-Driven Manufacturing

Decisions about the cutting tools used in machining operations are arguably among the most important in modern manufacturing.


Cutting Tool Edge Prep: The Invisible Advantage

Edge preparation involves removing material from a cutting tool in order to extend its life. That may sound counterintuitive, but a maker of glass molds says edge prep has dramatically reduced the amount it spends on tools.


« Prev | | Next »



Amerimold 2016
ERIX tool saves up to 90% of the manufacturing time on back spotfacing and chamfering operations.
AMAMCO Tool exceeds ISO and AS 9100 standards for quality, precision, and consistency.
Click here>