Tooling & Workholding

Exploring the: Cutting Tools Zone
Videos


Sort by:

« Prev | | Next »


Video Profile: Lean Machining at Vanamatic

See how this Delphos, Ohio, screw machine shop has saved considerable time by making its process on the shop floor more lean.


Video: Faster Micro-Finishes for Micromachining

 Smooth finish comes from balanced cutting parameters, as this video explains.


Video: Understanding The Role Of L:D Ratio In Micromachining

When milling with tiny tools, changing the length-to-diameter ratio can significantly change the cutting parameters it is possible to achieve.


Finishing A Pocket Floor In Titanium

Machining animation from Boeing illustrates effective techniques for titanium workpieces. This simulation also shows finishing of the floor of the pocket.


Finishing Walls In Titanium

Machining animation from Boeing illustrates effective techniques for titanium workpieces. This video shows material machined out of the corners prior to finishing.


Plunge-And-Sweep For Finishing Corners

Machining animation from Boeing illustrates effective techniques for titanium workpieces.


Video: Finish-Milling Titanium With A 20-Flute End Mill

A tool with many flutes can be effective for achieving a productive metal removal rate in titanium, where speed and chip load are constrained. See how quickly the chips accumulate in this video.


Optimal Milling Strategy For Entering Material From The Side

These animations show why an arc in the same direction as tool rotation is effective. The strategy is relevant for entering material from the edge, as well as for pocketing.


Video: 56-Percent Productivity Increase By Reducing Chatter

The video compares a milling pass that chatters to one that is stable. Because the stable speed permits greater depth of cut, productivity increases.


Video: Helical Interpolation Vs. Drilling

A machining center able to maintain precise control at high feed rates makes it practical to machine holes through helical milling as an alternative to drilling.


« Prev | | Next »



ERIX tool saves up to 90% of the manufacturing time on back spotfacing and chamfering operations.
AMAMCO Tool exceeds ISO and AS 9100 standards for quality, precision, and consistency.
Click here>