Milling Tools

Exploring the: Milling Tools Zone

41 Results for: Case Study

Sort by:
Published: 1/1/2017

Toolholding for Heavy-Duty Machining
Heller Machine Tools needed to improve metal removal rates during roughing and heavy-duty machining. Haimer's Safe-Lock system enabled high-feed slotting of up to 2 times diameter in difficult materials.

Published: 12/1/2016

Retooling Improves Rough-Milling Operation, Saves Money
McGill Machine Works' rough-milling operation was destroying its cutting inserts. Ingersoll's Di-Pos Hexa high-performance face mill improved tool life and throughput.

Published: 10/3/2016

Rethinking Standards for One-Offs
Orchard Lake Machining's standard mill used to rupture 10 minutes into the cut. Ingersoll's Di-Pos Tetra mill increased tool life and operator productivity.

Published: 12/1/2015

Shop Invests in Tooling Up Front, Saves Money in the Long Run
Valve supplier Vortex needed to optimize its in-house machining operations. Seco tooling helped the shop improve tool life, cycle times and finish.

Published: 12/1/2014

Cutting Tool Helps Automotive Manufacturer Implement Design Change
Horn USA’s Mini Mill helped Machine Tool and Gear mill a flat at 90 degrees from other operations.

Published: 12/1/2014

Face Mills Keep Shop from Making Large Capital Expenditure
By retooling its machines with Tedimill face mills from Ingersoll Cutting Tools, Ward Production Engineering was able to take on a jump in order volume without making a large capital investment.

Published: 11/24/2014

Groove Milling Cuts Down Cycle Time for Inconel Part
When a shop tries to outsource a part, but no vendors want to take on the job, it’s time for that shop to figure out how to machine the job on its own.

Published: 9/1/2014

Tooling Selection Keeps Big Aerospace Component In-House
Attention to the tool-up process enabled JWF Industries to launch a large-scale defense industry radar frame project, keeping production in-house and ultimately shaving weeks off of the expected production time.

Published: 7/1/2014

Tangential Milling, Slow-Motion Video Address Slotting Bottleneck
By switching to tangential milling from Ingersoll Cutting Tools and using a slow-motion video to identify and overcome a lack of horsepower, Busche Enterprise was able to reduce cycle time and tool cost.

Published: 12/1/2013

New Tooling Improves Machining Cell Output
By incorporating advanced tooling from Seco Tools, Thern Inc. was able to increase its machine tool capacity and reduce cutting costs.