Toolholders

Exploring the: Toolholders Zone

106 Results for: New Product

Sort by:
Published: 5/9/2016

Electrospindles Hold as Many as Eight Tools
ITI Tooling’s ATC series of electrospindles with built-in multi-station tool carrier have been developed specifically for boost performance on production machines and robots handling multiple operations or requiring redundant tooling.

Published: 5/5/2016

Expanded Tap Holder Line Reduces Axial Forces
Emuge Corp. has expanded its Softsynchro tap holder line, adding two new holder series.

Published: 5/2/2016

Milling Chuck Eliminates Pullout while Machining HSRAs
Big Kaiser introduces the Mega Perfect Grip from Big Daishowa, a milling chuck for machining heat-resistant super alloys (HRSAs) like titanium or Inconel, designed to eliminate end mill pullout under heavy torque loads.

Published: 4/22/2016

DuoJustCut Parting-Off Tool for Swiss Lathes
Even if the first cutting edge is chipped, the other cutting edge can be used because of the design of the insert clamping.

Published: 4/8/2016

Exchangeable Spindle Increases Machine Speed
NT Tool’s Hyper Spindle use a 1-to-5-ratio internal gear system to multiply existing machine spindle rpm by as much as five times at the cutting edge, with a maximum of 30,000 rpm.

Published: 3/7/2016

Angle Heads’ Bearings Ensure High Stability, Concentricity
Heimatec offers a line of standard and custom angle heads, available in a variety of sizes and styles and designed for heavy milling, deep drilling and tapping applications in the off-highway, energy, rail and other heavy-duty industries.

Published: 3/1/2016

RBX12 Air Power Spindle Allows Micromachining in a Machining Center
The air-driven spindle enables existing machines to be cost-effectively upgraded to perform high-speed micromachining in a normal machining center since this tool is driven by air supplied through a stop block or through the machine spindle.

Published: 2/24/2016

Tendo Aviation Toolholder for Demanding Applicaitons
The toolholder combines the strength of hydraulic expansion technology with that of Weldon toolholders.

Published: 2/10/2016

Collet System Avoids Cutter Pull-Out in High-Feed Applications
Pioneer has developed a cost-effective collet system for high-feed applications in which cutters pull out from their holders.

Published: 2/5/2016

Space Saver Toolholders Increase Machine Production
Space Saver VDI spindle units are toolholders designed to increase machine production capability by increasing tool capacity and reducing chip-to-chip or retooling time.