Turning Machines

Exploring the: Turning Machines Zone

15 Results for: Videos

Sort by:
Published: 9/18/2013

Multitasking's "Big" Advantage
As demonstrated at this Cincinnati-area shop, machines that both mill and turn shine brightest when workpieces are massive.

Published: 6/24/2011

The Buzz about the B Axis
The rotating milling head is a defining feature on a turn-mill machine designed for efficient production of complex parts in low volumes.

Published: 10/22/2010

Video: In-Process Scanning of a Turned Profile—via Robot
A robot reaching into a lathe measures along the entire part length in seconds, determining whether additional machining is needed.

Published: 9/10/2010

Video: Turn-Mill Probes for Accurate Camshaft Machining
Feature-to-feature accuracy for diesel camshaft segments is possible thanks to in-process probing.

Published: 7/19/2010

Video: Two-Spindle Machine Turns and Mills Turbo Housings
This five-axis, two-spindle machining center shows how multitasking machines can be used for production applications.

Published: 3/12/2010

The Value Of Probing On Turn-Mills
Part probing isn’t performed as often on turn-mills as it is on conventional machine tools. It does offer advantages for multitasking machines, though. Includes video.

Published: 2/23/2010

More Efficient Turbine Blade Milling
Video shows a multitasking machine milling a turbine blade in a cycle that few machining centers could replicate.

Published: 12/9/2009

High-Volume Alternative To Machining Centers
Transfer machines that are flexible rather than dedicated can run large quantities without dedicating labor or floorspace. (Includes video.)

Published: 10/13/2009

Aluminum Molds In Three Weeks Or Less
While aluminum molds are commonly used to create prototypes or to serve as stopgap bridge tooling, they are starting to receive greater attention for production work. This shop’s approach to creating aluminum molds in one day to three weeks is the s...

Published: 8/18/2009

Turning On A Machining Center
VIDEO. Part of Renishaw’s automated production process, this turning operation uses tools affixed to the machining center’s table while the workpiece is mounted in the spindle.