Turning Tools

Exploring the: Turning Tools Zone

33 Results for: Article

Sort by:
Published: 3/16/2016

Artistry with Skive Tools
Oliver Wendell Holmes said, “All limitations are self-imposed.” This statement often holds true as machinists apply their creativity in skiving applications.

Published: 10/20/2015

Re-Turning Adds Life to Train Wheels
Tech Brief

Published: 7/24/2015

Tips on Breaking Chips and Controlling Burrs when Machining Automotive Transmission Components
Chip control is the bane of every shop’s existence and knowing how to consistently break chips and control burrs in ductile steels like SAE 1018, 1020, and 8620 is the holy grail of the tooling industry. When a shop experiences chip control issues, ...

Published: 7/16/2015

A Formula for Cutting Tool Success
The hardness and toughness of a tool are generally counteractive forces, and finding the right mix can be a challenge. Wouldn’t it be nice to have both?

Published: 12/30/2014

ISO 13399—A Key Step Toward Data-Driven Manufacturing
Decisions about the cutting tools used in machining operations are arguably among the most important in modern manufacturing.

Published: 12/16/2014

Second Chances for Surplus Tools
A new website aims to give shops with excess tooling a way to sell that tooling to other shops. Cutting tool suppliers are using the site for their own excess tools.

Published: 10/15/2014

Turning Exotic Materials
Heat-resistant superalloys and titanium alloys are difficult to machine. This overview looks at machining demands and some recent developments that have elevated performance and process security in turning these materials.

Published: 9/24/2014

Video Highlights Extreme Part-Off Demos
The strength of a tough part-off tool is shown in video showing it parting off a railroad rail and sledgehammer head. Talk about significant interrupted cuts…

Published: 8/14/2014

Productive Trade-Offs in Rough Turning
Maximizing productivity in rough turning operations requires a balance of trade-offs between the properties of the cutting tool substrate and the characteristics of its chipbreaker geometry.

Published: 7/16/2014

When to Consider Customized Cutting Tools
What is the real cost of choosing standard or customized tooling if time is money and efficiency translates into profits? It’s a question many shops face regularly.