Cutting Tools

Exploring the: Cutting Tools Zone

1143 Results for: Product

Sort by:
Published: 10/22/2018

Duro-A RC Chuck Reduces Setup Time
Röhm’s Duro-A RC power chuck reduces setup times because of its quick jaw-change system that enables the jaws to be adjusted, reversed or swapped out in 50 seconds.

Published: 10/20/2018

Hydraulic Chucks Clamp in Three Turns
Big Kaiser introduces hydraulic chucks for Swiss lathes.

Published: 10/19/2018

Boring Tool Kits Accommodate Various Spindle Tapers
Allied Machine & Engineering has added three Criterion boring kits to its lineup: a kit for 1.00" cylindrical shanks, another for R8 shanks and a third kit for #4 Morse taper shanks. 

Published: 10/18/2018

MDT System Offers a Variety of Applications
Seco Tools’ MDT tools offer a variety of applications including grooving, profiling, turning, parting-off and threading.

Published: 10/17/2018

CoroDrill Grades Offer Predictable Wear Patterns
Sandvik Coromant adds three grades for its CoroDrill 870 exchangeable-tip drill.

Published: 10/15/2018

Helical Cutter Delivers High Metal Removal Rates, Low Cutting Forces
Kennametal’s Harvi Ultra 8X helical milling cutter was designed to meet high metal removal needs in aerospace machining as well as to provide machinists with a tool that can withstand higher cutting speeds but generate lower machining for...

Published: 10/15/2018

Seco TS2000 and TS2500 Grades Boost Surface Quality
The Seco Tools’ heat-resistant TS2000 and TS2500 grades employ manufacturing techniques including an edge preparation process and coating.

Published: 10/12/2018

Modular Helical Cutter Promotes Process Reliability in Unstable Conditions
The M4258 modular helical milling cutter from Walter USA promotes cost efficiency and process reliability in slot milling and can be used for ramping, pocket milling, shoulder milling and circular interpolation.

Published: 10/12/2018

Hard-Turning Grades Excel in Automotive Transmission Applications
Sandvik Coromant’s CB7125 and CB7135 grades are said to enable the performance of medium-to-heavy interrupted cuts and removal of the hardened layer (depth of cut up to 2 mm) in case- and induction-hardened steel components.

Published: 10/12/2018

Drill's Precision Ground Surfaces Deliver Accuracy
With precision-ground surfaces and an engineered tip geometry, the DA110 Perform drill from Walter is suited for small- and medium-batch production.