Gear Production

Exploring the: Gear Production Zone

148 Results for: Product

Sort by:
Published: 2/9/2015

Non-Contact Probe Enables Force-Free Measurement of Gear Profiles
Hexagon Metrology’s HP-O non-contact scanning probe is intended as an alternative to tactile analog measurement and scanning probes, and is well-suited for scanning large parts and those that are rotationally symmetric.

Published: 2/6/2015

Dry-Cut Hobbing Machine for Small-Diameter Gears
An addition to its GE series of dry-cut hobbing machines, Mitsubishi Heavy Industries’ GE 10A is suitable for mass production of small-diameter gears such as those used in vehicle automatic transmission systems.

Published: 2/5/2015

Gear Hobbing Machine Reduces Cycle Times
Liebherr’s LC 100 gear hobbing machine is said to be capable of achieving chip-to-chip times of 3 sec.

Published: 2/4/2015

Gear Inspection System Features Active Air Suspension
Available from Kapp Technologies, the R&P Metrology RPG 3500DS gear inspection system is capable of measuring parts ranging to 3,500 mm OD or, optionally, 4,000 mm OD.

Published: 2/3/2015

Turning Center Capable of Gear-Cutting, Milling and Drilling
EMCO Maier’s Hyperturn 65 Powermill offers a spindle clearance of 1,300 mm along with a counter spindle to enable four-axis machining and a B axis with direct drive for five-axis simultaneous milling operations.

Published: 2/2/2015

Honing Machine Optimizes Gear Finishing
Available from German Machine Tools of America, the Präwema SynchroFine 205 HS gear honing machine features direct-driven, digitally controlled spindles for the tool and the workpiece, enabling precise, rigid synchronization.

Published: 7/17/2014

Large-Scale Grinders Promote Reproducibility
The Liebherr LGG 180 and 280 grinding machines use a one-table design and updated grinding head to quicken twist-free profile and generating grinding.

Published: 7/16/2014

Portable Metrology Measures Large Gears
R&P Metrology’s RPG PM 750/1250 portable gear metrology machine, available from Kapp Technologies, is able to check spur and helical gears of virtually any size.

Published: 7/15/2014

Multitasking Machine Speeds Production with Power Skiving Process
DMG MORI will exhibit its DMC 80 FD DuoBlock multitasking machine offering power skiving capabilities.

Published: 7/15/2014

Robot-Equipped Grinding Cell Reduces Cycle Time
Gosiger Automation offers a grinding cell that combines an Okuma GA-47 grinder with a FANUC robot that is equipped with a vision system.