Toolholders

Exploring the: Toolholders Zone

83 Results for: Article

Sort by:
Published: 10/1/2015

Testing Measures Impact of Toolholder Interface Rigidity
Though Big-Plus and HSK share superficial similarities, they differ fundamentally in how they clamp the holder--a difference with important implications.

Published: 9/1/2015

Alternate Coolant Delivery Method Made a Difference
Haimer's Cool Flash toolholder delivers coolant through small slits to cover the entire tool circumference.

Published: 9/1/2015

“Spirograph” Generates Face Grooves on a Machining Center
Sandvik Coromant's unusual "SpiroGrooving" system uses an adjustable toolholder to machine API grooves on a machining center.

Published: 7/16/2015

A Formula for Cutting Tool Success
The hardness and toughness of a tool are generally counteractive forces, and finding the right mix can be a challenge. Wouldn’t it be nice to have both?

Published: 7/1/2015

Systematic Success
A more efficient manufacturing process has enabled this manufacturer to ramp up production of its devices for the oil and gas industry.

Published: 6/1/2015

Anti-Vibration System Improves Rigidity of Milling and Turning Assemblies
Seco's Steadyline anti-vibration damping holders are designed to improve the dynamic rigidity of milling and turning tool assemblies.

Published: 12/30/2014

ISO 13399—A Key Step Toward Data-Driven Manufacturing
Decisions about the cutting tools used in machining operations are arguably among the most important in modern manufacturing.

Published: 11/25/2014

Expanded Anti-Pullout System Enables Secure Titanium Milling with ER Collet Systems
Because of the extreme forces involved in machining titanium and other hard metals, it is necessary to take precautions to avoid pullout—the tendency for a cutting tool such as an end mill to gradually loosen in its holder and possibly be twis...

Published: 8/28/2014

Ultrasonic-Assisted Machining with Standard Machines and Tools
A system to be marketed in 2015 will apply ultrasonic vibration from within the toolholder to reduce cutting force and improve the performance of the cut.

Published: 4/28/2014

Eliminating Tool Pullout in Titanium Milling
Toolholder employs a secondary locking system to counter the high axial cutting forces encountered during the development of a tool for high-metal-removal-rate milling of titanium.