Additive Manufacturing Standards
There are gaps in published additive manufacturing standards. Here are some resources and standards to help make sense of the growing technology.
There are gaps in additive manufacturing in which no published standard or specification currently exists for AM to respond to a particular industry need.
The subtle variations of each of the seven additive manufacturing (AM) process, the hundreds of systems available in the market, and the rapidly improving technologies make it challenging to stay on top of AM technology and even more challenging for standards to keep pace. In fact, America Makes, the National Additive Manufacturing Innovation Institute, in coordination with the American National Standards Institute (ANSI) identified 93 gaps in which there are no published standards or specifications for AM to respond to a particular industry need. One such example is how to characterize the spreadability of powder feedstocks used in powder-bed fusion processes.
For those struggling to make heads or tails of all the AM processes I’ve been highlighting in recent columns, I’ll detail some helpful resources below.
First, you need to make sure you are using the right terminology. If you are uncertain about some of the process definitions or key terms, then ISO/ASTM52900-15 is the place to start. This standard defines basic nomenclature, important terminology and commonly used acronyms in the industry. This standard supersedes ASTM F2792-12a, which was withdrawn once the joint ISO/ASTM standard was developed and published in 2015.
Of the seven AM processes, powder-bed fusion (PBF) and directed energy deposition (DED) are seeing the most activity in terms of standards development. These two AM processes enable the production of metal end-use parts, which ultimately need to meet the same requirements as any traditionally made component. As such, companies are clamoring the loudest for standards for PBF and DED to ensure that their processes and parts can be qualified and certified accordingly.
Last year, SAE International released an Aerospace Material Specification (AMS) for laser PBF (AMS7003), and ASTM International released a standard to characterize the performance of PBF processes for producing metal parts serving critical applications (ASTM F3303-2018). Meanwhile, ASTM International issued a standard guided for DED with metals in 2016 (ASTM F3187-16), and SAE International is actively developing standards for specific DED processes (e.g., AMS7005 defines specifications for wire-fed plasma arc DED) and materials made via DED (e.g., stress relieved Ti-6Al-4V parts made with plasma arc DED is governed by AMS7003). Both of these standards were just released in 2019.
If you are looking for more general guidance on metal AM or haven’t decided yet on PBF or a specific type of DED, then the American Welding Society (AWS) specification for fabrication of metal components using AM is a good place to start (AWS D20.1/D20.1M:2019). The AWS specification provides process flowcharts for both PBF and DED for components with different levels of criticality. It also provides sample records for test builds and qualification builds for processes and parts. It is one of the few standards to outline guidelines for qualifying the performance of machine operators and inspection personnel, leveraging its related experience qualifying training for operators and inspectors in the welding industry.
On the design side, ISO and ASTM International have been actively collaborating on new AM standards. General guidelines for design for AM were released in 2017 (ISO/ASTM 52910:2017(E)), and specific design guidance for laser-based PBF is now available for both metals (ISO/ASTM 52911-1:2019(E)) and polymers (ISO/ASTM 52911-2:2019(E)). Meanwhile, if you are wondering how to dimension and specify tolerances on lattice structures and complex shapes that can be made with AM, then the American Society of Mechanical Engineers (ASME)’s standard for product definition with AM is the best place to start (ASME Y14.46-2017). The original version is currently being reviewed for updates and will be re-released as soon as balloting ends.
In terms of materials, powder characterization is important to specify the right feedstock for a PBF or a powder-fed DED system. The ASTM Standard Guide for Characterizing Properties for Metal Powders used for AM processes provides relevant guidance (ASTM F3049-14). It also references several complementary standards from the Metal Powder Industries Foundation (MPIF), which just released a new collection of powder characterization methods for metal AM processes. Meanwhile, wire feedstock for DED is being governed by existing AWS specifications for the welding industry since the same feedstocks are often used on wire-fed DED systems. The A5 Committee of AWS issues standards and guidance on filler metals, consumables and more (AWS A5.01M/A5.01: 2013). More information can be found on the committee’s website.
While standards are advancing for AM, databases of material properties and design allowables are lagging. Qualified databases of materials are becoming available for popular polymers like Uletm 9805 thanks to the efforts of rp+m and America Makes, but comparable efforts for metals are still underway. It will likely be awhile before this data is publicly available given the time and cost to generate this information for metals used in AM.
Despite the lack of material databases, guidance documents are available for heavily regulated industries like medical and aerospace. The Food and Drug Administration released a guidance document in 2016 for medical devices being made with AM. The Federal Aviation Administration is actively developing a strategic roadmap for AM process qualification and part certification for aerospace applications. For spaceflight hardware, NASA has released a standard for metal components made with laser PBF as well as a specification for qualification and control of laser PBF processes for metals. These are useful documents that other industries are actively evaluating for adoption. Finally, ASME has launched a special joint committee to evaluate the use of AM for pressure technology (boilers and pressure vessels, for example) and regulation within nuclear codes and standards.
If this is still too daunting, then the best place to start is the America Makes and ANSI Additive Manufacturing Standards Collaborative (AMSC). Their standardization roadmap is more than 260 pages long, so you may want to start with the 20-page standards landscape document. As for those 93 AM standard gaps, their website added an interactive portal in October 2019 to help track standards development. I have been impressed with the website’s simple layout and level of detail provided for each of the standard gaps identified by the committee.
When Precision Metal Products purchased its first 3D printer last year, the company hoped to collapse both tooling costs and lead times. But the technology’s impact is reaching core business operations, enabling the shop to focus on higher-margin, lower-volume production.
Is additive manufacturing (AM) ready for production scale? The latest issue of Additive Manufacturing magazine highlights manufacturers who are succeeding with 3D printing for production right now.
With PCD tooling, yes it can. The diamond cutting edges demand a large number of flutes to realize their full effectiveness. Traditional methods for making cutter bodies limit the number of flutes, but 3D printing is delivering tools with higher flute density and other enhancements as well.