New Users Are Adopting Simulation Software
Even though the market for NC simulation software is mature, that doesn’t mean that new users cannot adopt it. In fact, one CGTech representative lists four reasons why shops that had never considered simulation software before are now opting for it.
.jpg;width=70;height=70;mode=crop)
Share
I might have thought that NC simulation software was a mature market. CGTech’s Vericut software, which accurately models CNC machine tools in order simulate the postprocessed version of an NC program, has been available for years—long enough for shops able to benefit from this simulation to have found it. Yet when I recently spoke with a CGTech representative, he said that in fact new business is surging. Shops that have never considered simulation software before are opting for it now.
The company points to various reasons for this. They include:
Featured Content
1. Solid models. In past decades, it wasn’t necessarily true that shops were programming with solid models. Today, the use of solid models is commonplace. Broader availability of solid models for workpieces, cutting tools and machines makes program simulation easier to implement.
2. Higher value work. Particularly for U.S. manufacturers, some of the most lucrative machining opportunities involve parts that are geometrically challenging and/or made from a challenging material. Where the part value is higher, the value of avoiding an error or collision that could damage the part becomes that much higher as well.
3. Capacity constraints. Many shops today have enough work that they are challenged to schedule it all. Performing program prove-out on the machine, therefore, becomes a costly use of machine capacity. Better to prove out the program with software instead.
4. Five axis machining. This is the big one that CGTech sees. Many shops installing their first five-axis machine tool are justifiably cautious about the complexity of this machine’s movements. Simulating the five-axis job before it runs offers a way to safeguard this sophisticated machine.
RELATED CONTENT
-
B-Axis Turn/Mills Have Their Place
The additional rotary milling axis on these machines allows them to complete many types of complex parts in a single setup, but these machines have gained a reputation for being difficult to program. Today’s CAM software, however, eases the programming challenge significantly.
-
Understanding NURBS Interpolation
The right way to program curves? A solution to yesterday's problems? The truth is probably somewhere in between.
-
There Are Apps For That, Too
These two iPhone apps provide manufacturing professionals and students with quick access to helpful cutting tool information directly from their smart phones.
