Workholding

SMW Autoblok's SJL Power Chuck Grips Thin-Walled Workpieces

SMW Autoblok’s SJL six-jaw (2+2+2) equalizing and self-centering power chuck is designed to provide high accuracy with thin-walled and deformation-sensitive workpieces.

Kurt's Pyramid Workholding Platform Available in Vise Kits

Kurt offers a pre-engineered set of kits for its Pyramid workholding platform accommodating 12 different vise models.

Mitee-Bite's Concentric OD Clamping Device Provides High Repeatability

Compact and offering repeatability to within ten thousandths of an inch, the device is said to be suitable for high-density applications.

Sometimes the Trickiest Part of CNC Machining Is Holding the Part

Finding a way to fixture contoured marine propellers proved to be this shop’s biggest challenge in developing an effective automated machining cell.

Big Kaiser's Unilock Stabilizer 50 Counters Cutting Forces for Tall Parts

Big Kaiser’s Unilock Stabilizer 50, a modular device for the Uniflex ball system, provides lateral support for tall parts during machining, welding or assembly processes.

SMW Autoblok's Centco4 Chuck Centers, Compensates for Various Geometries

SMW Autoblok’s Centco4 2+2 self-centering and compensating chuck can clamp round, cubic, angular, irregular and other geometric workpieces.

Schunk's Vero-S NSE Mikro 49-13 Clamps Small Parts

Schunk’s Vero-S NSE Mikro 49-13 is a completely sealed miniature clamping module specifically for metalcutting, assembly, handling and measurement applications.

Garant Xtric Centering Vise Available in More Sizes

Hoffmann Group has modified the Garant Xtric centering vise with a center jaw and now offers the workholding device with four new base lengths.

Sveconek's High-Capacity Workholding System Holds 10 Parts

Sveconek LLC’s high-capacity workholding system can hold up to 10 parts in a single-acting machinist vise.

Quindex Fifth-Axis Device Attaches to Fourth-Axis Table

The Quindex fifth-axis indexing system from Index Designs is designed to enable five-sided machining applications.

SMW Autoblok's WPS/APS Workholding System Provides Flexibility

SMW Autoblok’s WPS/APS workpiece positioning system features zero-point clamping for use in turning, milling, inspection and finishing operations.

MicroCentric's Collet Chuck Compensates to 1.5 mm

MicroCentric’s quick-change compensating collet chuck is designed for machining shafts between centers.

RSS RSS  |  Atom Atom