7/26/2017 | 1 MINUTE READ

Case Study: In-House Gear Production Leads to Improved Quality, Speed

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

Advanced Design Technologies LLC’s subcontracted work led to quality issues, among other problems. Vero Software’s Surfcam 2017 R1 increased overall efficiency and quality.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon
d

With the help of W-Drive gears and other custom parts from Advanced Design Technologies, the Nitrochondriac race team set a new elapsed-time record for Top Fuel drag boats. The team covered the 1,000-foot course from a standing start in 3.38 seconds at more than 263 mph at the Lucas Oil Drag Boat National event in Marble Falls, Texas in August 2016.

Subcontracting work has its benefits. Mainly, companies can take on jobs even though their shops may not be properly equipped for every step of the production process. However, sometimes subcontracting work can cause more challenges than it is worth.

For instance, James Faulkerson’s company, Advanced Design Technologies LLC of Las Vegas, Nevada, initially manufactured all components for a power-splitting marine transmission called the W-Drive, except for the gears. These, he subcontracted until the late 1990s, when a faulty gear disintegrated and blew a large hole in the bottom of a boat traveling at close to 200 mph.

From that experience, Mr. Faulkerson decided the make everything himself. He started by acquiring a Haas VF-3 mill and SL-20 lathe. In 2002, he purchased the Surfcam Traditional CAM system to program his CNC machinery. Today, he runs Surfcam 2017 R1, using milling cycles such as face-mill, hole, roughing, profiling, flat-land-finishing and chamfering cycles. There are also a few unique milling cycles, such as the flow-surface and parallel-cace cycles, that simplify the complex milling of non-uniform 3D shapes and surfaces.

Read the full story to learn how Mr. Faulkerson uses Surfcam by Vero Software to manufacture Top Fuel Hydroplane drag boat transmissions and custom parts for Tommy Thompson Racing’s Nitrochondriac team.


RELATED CONTENT

  • Hard Milling Isn’t Just High Speed Machining

    Milling complex forms in hardened tool steel involves more than just fast, light cuts, says this maker of medical-related injection molds. Here are some of the ingredients of an effective hard milling process.

  • Understanding Post Processors

    What is a post processor? A software engineer from CNC Software, makers of Mastercam programming software, explains the different types of CNC post processors, the different types of post processor users and the different levels of functionality in post processors.

  • DNC: Faster And Better -- Part One

    Direct numerical control (DNC) should solve problems, not create them. If you under-stand how DNC works and follow the tips presented in this article, you can maximize its benefits and avoid headaches with your system. Part One of a two-part series.

Resources