| 1 MINUTE READ

Consolidated Clamping Assembly Made by Additive Manufacturing

Metal additive manufacturing made it possible to condense a three-part clamping assembly into a single piece.

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon
O

This clamping unit used in Comau welding and assembly operations was redesigned for additive manufacturing, enabling the three-part assembly (left) to become just one piece (right). 


Redesigning a part with additive manufacturing in mind often means simplifying or even eliminating fabrication by combining an assembly into fewer complex components. In a recent application, industrial automation supplier Comau used selective laser sintering (SLS), a powder-bed additive technology, to create in one piece a clamping assembly that had previously been made from multiple distinct parts.

This clamping assembly (pictured above) is used to secure parts of Comau equipment for welding and assembly. The original clamping unit was made in three parts from steel S355JR. The additive-manufactured version was selective laser sintered in just one piece out of ALSi10Mg, resulting in a stronger and lighter component. Light postprocessing was performed on the fitting areas and holes, but no other finishing work was required.

Read more about the redesign and benefits of this additively manufactured clamping assembly in this article from sister publication Additive Manufacturing

RELATED CONTENT