Hydraulic or Pneumatic Actuation for Collet Blocks?
Collet-style workholding devices like collet blocks offer a number of benefits, but which actuating method is most appropriate for you?
.jpg;width=70;height=70;mode=crop;format=webp)
Grouping collet blocks together enables machine tools to machine multiple parts unattended. Collet blocks can be configured in a number of ways, including on tombstones and trunnion tables.
Collet-style workholding devices, such as collet blocks, offer a number of benefits. Collets automatically center parts to their center points known locations, they provide equal gripping pressure around a part’s circumference and expanding collet systems enable effective internal gripping of thin-wall parts. Grouping collet blocks together enables machine tools to machine multiple workpieces unattended over long stretches of time. However, should you go with pneumatics or hydraulics to actuate them? This article based on input from Hardinge offers advice.
Related Content
-
Fixturing Castings Made Simple Through Adhesive Workholding
When a casting proved too malleable for traditional gripping, Thomas/Euclid Industries adopted — and succeeded with — Blue Photon adhesive workholding.
-
Moving To Magnets Doubles Productivity
Moving from hydraulic to magnetic fixtures enabled this shop to reduce setup time, improve rigidity and eliminate manual operations. As a result, productivity doubled.
-
Parts and Programs: Setup for Success
Tips for program and work setups that can simplify adjustments and troubleshooting.
