Do You Have What it Takes to be a MMS Top Shop?
Published

MMS Looks Back: 1970s - When We Looked Back and Forward

One article in the 50th anniversary issue recapped the emerging technologies covered in years past, but another predicted how the digital computer and automation might impact our industry in the future. This story is part of our 90th anniversary series.

Share

The June 1978 edition of Modern Machine Shop was significant in that it was the 50th anniversary issue. Its cover imagery as shown above portrayed both a bit of nostalgia (belt-driven machine tools) and a bit of foreshadowing (the advent of computer technology applied in manufacturing).

For that issue, the editors created a yearly-diary-like article citing world events, changes that had been made to the magazine, and topics, trends and technologies that were covered in each of the magazine’s 50 years. The section about the 1970s offers evidence that digital computer technology would start to be implemented in manufacturing operations in significant ways. For example, the 1974 blurb says it “looks like the CAD/CAM concept is becoming a ‘buzzword’ as an outgrowth of numerical control (NC). I can see the real beginning of high interest in the use of the computer for the entire plant manufacturing environment.” The 1976 blurb points to the “dominance of computer numerical control (CNC) at the International Machine Tool Show,” known today as the International Manufacturing Technology Show (IMTS).

Therefore, it is not surprising that in the era when the impact of new CNC machine tool technology was just starting to be felt, the subsequent article in that issue titled “Computers Advancing World Manufacturing Technology” features an industry expert’s predictions about how computer technology would change the face of machining and manufacturing in the years to come. Dr. M. Eugene Merchant, the director of research planning for Cincinnati Milacron at the time said:

  • By 1980, a computer software system for full automation and optimization of all steps in the manufacturing of a workpiece would be developed and in wide use.
  • By 1985, full online automation and optimization of complete manufacturing plants controlled by a central computer would be a reality.
  • By 1990, more than 50 percent of the machine tools produced would no longer “stand alone.” Instead, multiple machines would be grouped in cells (he did not use that word) with material-handling systems that would be controlled by a central computer.
  • By 2000, the “computer-integrated automatic factory” would be a full-blown reality.

There would be two major productivity-enhancing incentives for establishing such an automated, computerized shop, Dr. Merchant said. The first would be to “reduce the time workpieces spend in process in the shop. This would reduce the high and costly inventory of unfinished parts on the shop floor and of finished parts waiting for others in process so that assembly of the product could proceed.” The second would be “vastly improved machine tool utilization.”

To this day, these remain important manufacturing goals for shops, and shopfloor practices based on the power of today’s computers and software (as well as tablet devices and apps) continue to be devised and applied to achieve them. However, when he talked about automation, was he thinking primarily in terms of robotics and “hands-free” flow of parts from machine to machine through a facility? An artist’s rendering of an automated machining cell in the article suggests this. Clearly, there are some advanced manufacturing facilities that do function as such with minimal human intervention. However, there are still many shops today in which there is no robot to be seen. Plus, it is ironic in that new collaborative robots featuring designs that enable a human to work safely alongside them are becoming increasingly popular.

That said, there are other elements of automation that shops can leverage to reduce overall production time and improve machine utilization. For example, on-machine probing technology can automatically measure cutting tools and determine if a tool has broken as well as probe workpieces to speed setups or measure machined features to detect if the process is trending out of specification. Presetters can similarly automatically measure tools outside the machine. Bar feeders and parts collectors on turning centers enable long stretches of unattended machining. Five-axis and turn-mill machining are forms of automation in that they can machine multiple part features (sometimes all part features) in one setup, eliminating the need for operators to set up those parts on multiple machines. Sensors mounted on some of today’s machine tools feed information to enable a CNC to automatically change parameters depending if the data suggests there is a problem.

Ultimately, though, it seems Dr. Merchant was predicting how computer technology would serve to connect disparate elements of manufacturing as that rendering in the article also suggests. Given the level of connectivity that has been established not only in manufacturing, but myriad aspects of our personal lives, I would say he was spot-on in that regard.

Techspex
IMTS 2024
Gardner Business Intelligence
High Accuracy Linear Encoders
CHIRON Group, one stop solution for manufacturing.
World Machine Tool Survey
Starrett 2900 Series Digital Indicator
MMS Made in the USA
Precision Components
Koma Precision
Kennametal
SolidCAM

Related Content

Turn/Mill

Weiler to Debut New Automation Features For Its Lathes

Weiler’s V 110 four-way precision lathe introduces features new to the U.S.

Read More
Automation

CNC Machine Shop Honored for Automation, Machine Monitoring

From cobots to machine monitoring, this Top Shop honoree shows that machining technology is about more than the machine tool.

Read More
Automation

Putting Production on Repeat with Machine Tool Automation

Cobots and automation advances have spurred tooling and workholding innovations like Big Daishowa’s zero-point workholding system and EWA fine boring head.

Read More
Turning Machines

Inside the Premium Machine Shop Making Fasteners

AMPG can’t help but take risks — its management doesn’t know how to run machines. But these risks have enabled it to become a runaway success in its market.

Read More

Read Next

Shop Management Software

5 Tips for Running a Profitable Aerospace Shop

Aerospace machining is a demanding and competitive sector of manufacturing, but this shop demonstrates five ways to find aerospace success.

Read More

3 Mistakes That Cause CNC Programs to Fail

Despite enhancements to manufacturing technology, there are still issues today that can cause programs to fail. These failures can cause lost time, scrapped parts, damaged machines and even injured operators.

Read More
Kennametal