10/16/2019

Product Spotlight: Measurement and Inspection

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

This month’s Modern Equipment Review Spotlight focuses on technologies for part measurement, tool setting and machine inspection. 

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

The image gallery above, based on Modern Machine Shop magazine’s Modern Equipment Review Spotlight, features a selection of the product releases we have recently published pertaining to technologies for part measurement, tool setting and machine inspection. More product releases can be found in our Zone dedicated to measurement and inspection.

Swipe through the gallery for details about each product, and follow the caption links for more information. Products featured in this month’s spotlight come from the following companies:

RELATED CONTENT

  • Working With Your Working Gage Blocks

    The uses of working gage blocks are as varied as the number of gage blocks in a large set. The working blocks have an intermediate grade and are often used in the inspection or calibration lab, but they may also be found on the shop floor.

  • Do's And Don'ts For Keeping Dial Indicators In The Game

    Just because dial indicators have been around since the early 1900s, don't expect them to fade away with the last century. This tool's long-term popularity is well earned.

  • Surface Texture From Ra to Rz

    The irregularity of a machined surface is the result of the machining process, including the choice of tool; feed and speed of the tool; machine geometry; and environmental conditions. This irregularity consists of high and low spots machined into a surface by the tool bit or a grinding wheel.

Resources